Advantek Networks ANS-24RV user manual

Page 15

This program can be downloaded from the web site. http://tftpd32.jounin.net/.You don’t need to install this program. To run TFTPD32 just launch the executable file tftpd32.exe. The configuration procedure for DHCP/BootP server is illustrated as the following figures.

Step1: Click the “Settings” item and set base Directory.

Step2: To update the firmware through this program, you should select TFTP server, DHCP server and Syslog server.

Step3: Click the “DHCP Server” item and setup items shown below. After finishing the settings, click “SAVE” item to save the configuration.

15

Image 15

Contents Port Fast Ethernet Switch With Vlan and Trunking Trademarks FCC WarningCopyright1999 All Rights Reserved CE Mark WarningContents Class of Service Configuration Product Features Package contentsGeneral Description Rear panel Front panel LED indicatorsPower Connecting Connecting computers to the switchTo prolong the operational life of your units Configure system network Installing the Fast Ethernet SwitchLogin the Web SmartSwitch Home overview Authentication Configuration AdministratorSystem Status System IP ConfigurationLoad Default Setting Make Sure the Firewall Setting Firmware updatePage Port Management Port ConfigurationBandwidth Control Port MirroringBroadcast Storm Control Vlan Setting Group Vlan SettingMulti to 1 Setting Trunk Configuration Trunk SettingQoS Setting Priority ModeClass of Service Configuration MAC Address MAC Address ConfigurationConfiguration Backup/Recovery ConfigurationSetup HyperTerminal Connecting to the Switch Console PortPage Page Load Default Setting Configure Switching Hub via COM1 Port Switch Main Menu