Advantek Networks ANS-24RV user manual

Page 26

Step 4: Select “19200” in Bits per second field and click “Apply” & “OK” buttons to save the settings.

Step 5: Reset or pull out the switch power. And then the HyperTerminal screen will appear. Wait for a while for system checking and then press “s” to enter the console.

Note: If you press other key, you won’t into the console, please reset the power again and repeat this step.

Image 26

Contents Port Fast Ethernet Switch With Vlan and Trunking CE Mark Warning FCC WarningCopyright1999 All Rights Reserved TrademarksContents Class of Service Configuration General Description Product FeaturesPackage contents Connecting computers to the switch Front panel LED indicatorsPower Connecting Rear panelTo prolong the operational life of your units Installing the Fast Ethernet Switch Configure system networkLogin the Web SmartSwitch Home overview Administrator Authentication ConfigurationSystem IP Configuration System StatusLoad Default Setting Firmware update Make Sure the Firewall SettingPage Port Configuration Port ManagementPort Mirroring Bandwidth ControlBroadcast Storm Control Multi to 1 Setting Vlan SettingGroup Vlan Setting Trunk Setting Trunk ConfigurationClass of Service Configuration QoS SettingPriority Mode MAC Address Configuration MAC AddressConfiguration Configuration Backup/RecoveryConnecting to the Switch Console Port Setup HyperTerminalPage Page Configure Switching Hub via COM1 Port Switch Main Menu Load Default Setting