Advantek Networks ANS-24RV user manual Connecting to the Switch Console Port, Setup HyperTerminal

Page 24

3. Console User Interface

3.1 Connecting to the Switch Console Port

User can configure the switch system via terminal emulation program through RS-232 port with baud rate 19200-8-n-1. The RS-232 connector is on the back panel of the switching hub; make sure you connect the other end of serial port to COM1 of PC.

Note: When you use HyperTerminal with MS Windows 2000, make sure that you have Windows 2000 Service Pack 2 or later are installed. Otherwise the arrow keys do not function properly under HyperTerminal’s VT100 emulation.

3.2 Setup HyperTerminal

Please follow the steps to setup the HyperTerminal:

Step 1: Click Start Æ All Programs Æ Accessories Æ Communications Æ HyperTerminal.

24

Image 24

Contents Port Fast Ethernet Switch With Vlan and Trunking FCC Warning Copyright1999 All Rights ReservedCE Mark Warning TrademarksContents Class of Service Configuration Product Features Package contentsGeneral Description Front panel LED indicators Power ConnectingConnecting computers to the switch Rear panelTo prolong the operational life of your units Installing the Fast Ethernet Switch Configure system networkLogin the Web SmartSwitch Home overview Administrator Authentication ConfigurationSystem IP Configuration System StatusLoad Default Setting Firmware update Make Sure the Firewall SettingPage Port Configuration Port ManagementPort Mirroring Bandwidth ControlBroadcast Storm Control Vlan Setting Group Vlan SettingMulti to 1 Setting Trunk Setting Trunk ConfigurationQoS Setting Priority ModeClass of Service Configuration MAC Address Configuration MAC AddressConfiguration Configuration Backup/RecoveryConnecting to the Switch Console Port Setup HyperTerminalPage Page Configure Switching Hub via COM1 Port Switch Main Menu Load Default Setting