EFJohnson FM Portable Radio Intrinsically-Safe SMARTNET, SmartZone Conventional Conventional Mode

Page 9

OPTION SWITCH FUNCTIONS

OPTION SWITCH FUNCTIONS

AUX

FCN

F1 F2 F3

ENT

1	2
4	5
7	8
*	0
*

3	F1
6
	F2
9	CLR
	CLR
#	F3
	ENT

The programmable option switches are AUX and FCN on the side panel and F1/F2/F3 on 3-key models and F1/F2/F3/*/# on 15-key models as shown above. The available functions for each operating mode and the page on which each function is described are listed in the following table. Consult your dealer to determine what functions are controlled by each switch and then write the switch label next to the applicable function. Do this for each mode in which your radio operates. Refer to page 17 for more option switch information.

CONVENTIONAL MODE

Switch	Function	See Page
	Backlight	17
	Displayed Information	25
	High/Low Power	29
	Home Zone	19
	Keypad Lock	18
	Monitor	26
	Normal/Selective	27
	Priority	32
	Radio Wide Scan	21
	Repeater Talk-Around	29
	Scan	21
	Scan Edit	31
	Tones On-Off	20
	Zone	18

9

Image 9

Contents Series Page Page Safety Information Other Important Operating Information General Features Features Conventional Features Smartnet II FeaturesTable of Contents Intrinsically Safe Classification Conventional Mode Option Switch FunctionsSMARTNET/SMARTZONE Mode Top Panel Indicators Controls and DisplayTop Panel Controls Side Controls Front Panel Keys 3-Key Model Front Panel Keys 15-Key Model Display Turning Power On and Setting Volume General OperationIntroduction Backlight Option SwitchesKeypad Lock Low Battery IndicationChannel and Zone Selection Channel SelectTime-Out Timer Zone SelectHome Zone Tone Enable/Disable ScanningIntroduction Radio Wide Scanning Standard ScanningScan Resume Delay Standard Mode Scan ListRadio Wide Mode Scan List Determining Which Channels are in Scan List Nuisance Channel DeleteConventional and SMARTNET/SmartZone Operation SMARTNET/SmartZone Operation Conventional OperationConventional Features Display Mode SelectionMonitoring Before Transmitting Monitor Mode Call Guard Squelch Busy Channel LockoutPenalty Timer Conversation Timer Power Output SelectRepeater Talk-Around Conventional Mode Scanning GeneralSelecting a Scan List Programming a Scan List Transmitting in Scan ModeChanging The Priority Channel Priority Channel SamplingStandard Conventional Calls SMARTNET/SMARTZONE Features DTMF/ANI SignalingViewing Unit ID Standard Group Calls Placing an Enhanced Private Conversation Call Enhanced Private Conversation CallsSMARTNET/SMARTZONE Features Receiving an Enhanced Private Conversation Call Placing a Private Conversation II Call Private Conversation II CallsSMARTNET/SMARTZONE Features Receiving a Private Conversation II Call Telephone CallsPlacing a Telephone Call SMARTNET/SMARTZONE Features SMARTNET/SMARTZONE Features Call Alert Messaging Sending Status Conditions Failsoft Operation Emergency Alarm and Emergency CallDynamic Regrouping SMARTNET/SmartZone ScanningDetermining Current Site and Searching For New Site Miscellaneous Locking/Unlocking a SiteSupervisory Tones Miscellaneous Rechargeable Battery Pack Miscellaneous Speaking Into Microphone Dealer ProgrammingOperation At Extended Range LicensingIntrinsically Safe Classification Transceiver ServiceClassification of Atmospheres Class/Group Classification of Hazardous Areas DivisionTypical Hazard Group Class IndexSmartnet 6 Index