Alcatel Carrier Internetworking Solutions 4324 manual FE Network Ports, Status Description

Page 33

Appendix B

1FE Network Ports

Ports are grouped in banks of 8 (as shown in Figure B-1on page 18). There are 3 banks, for a total of 24 ports. These ports provide 10/100 Mbps Fast Ethernet connectivity, and in some cases, power and serial connectivity as well. See material starting on page 20 for port and cable specifications.

ALNK/ACT LED

Each FE port has its own LNK/ACT LED, located at the left side of the port. During operation, these LEDs provide the following status information:

TABLE B-1FE LNK/ACT LED

Status

Description

 

 

Off

No Ethernet link on the port.

Green

An Ethernet link has been established on the port, but no

 

data is currently being transmitted or received.

Flashing

The port is transmitting or receiving data. The flashing

Green

rate is proportional to your network activity.

 

 

BPOE LED

Each FE port has its own POE LED, located at the right side of the port. This LED provides the following POE status information:

 

TABLE B-2FE POE LED

 

 

Status

Description

 

 

Off

The port is disabled or the attached device has not

 

requested power. POE is not being provided by the port.

Green

POE is being provided to the attached device.

Amber

The attached device has requested power, but POE is not

 

being provided by the port.

 

 

Ports 19

Image 33
Contents OmniAccess 4324TM Copyright FCC Class a Industry Canada Class aVcci Class a CE Class a EU Class a SafetyContents Pin Outs Cables GE Uplink Ports Serial & Power Over Ethernet Physical Description & LEDsOverview of this Manual PrefaceText Conventions Related DocumentsContacting Alcatel OmniAccess 4324 Installation Guide To the Network Manager Alcatel Wireless LAN SolutionInitial configuration of the Alcatel Wireless LAN Switch Physical installation of the Alcatel Wireless LAN SwitchPlanning the location of access points and air monitors Deployment SummaryPhysical installation of the Alcatel Wireless Access Points Advanced configuration of the Alcatel Wireless LAN SwitchMonitoring and maintenance OmniAccess 4324 Installation Guide Xiv System Overview FeaturesPower System Indicator LEDsPhysical Description StatusFans/heat exhaust on side GE uplink portsOmniAccess 4324 Installation Guide Pre-Installation Checklist Installing the ChassisPrecautions Rack Mounting Kit RequirementsCool, non-condensing ventilation Selecting a Location2Attaching the Rack Mounting Brackets Mounting the Chassis3Mounting the Alcatel Wireless LAN Switch Attach the Alcatel Wireless LAN Switch to the rack4Keep Clear Zones Adhere to clearance requirementsConnecting Power Verify you understand the procedure and all precautionsAttach the power cord to a proper electrical outlet Check for the proper power indicators Verifying the InstallationCheck for the appropriate operation indicators Check the fans to verify they are workingOnce the system has passed the initial power-up test Power Management Component Name Power Number Rating Units SubtotalTotal POE power required in Watts OmniAccess 4324 Installation Guide Gigabit Ethernet GE ports PortsOmniAccess 4324 FE Network Ports Serial & Power Over EthernetFE Network Ports Physical Description & LEDsStatus Description FE Network PortsPin Outs Access Point Status LEDsCables AP Make and ModelSerial Alcatel Spoe Adapter Physical Description and LEDs GE Uplink PortsGbic Type Vendor Module ID Approved GBICsCables Gbic Type CharacteristicsPort & Adapter Pin Outs Serial Console PortBaud Rate Data Bits Parity Stop Bits Flow Control Communications SettingsSpecification SpecificationsPhysical EnvironmentCertifications Page OmniAccess 4324 Installation Guide

4324 specifications

The Alcatel Carrier Internetworking Solutions 4324 represents a significant leap in leveraging advanced networking technologies for service providers and enterprises. This robust solution is designed to meet the increasing demands for high-capacity data transport and versatile routing capabilities in an evolving telecommunications landscape.

One of the standout features of the Alcatel 4324 is its high port density, which allows for efficient use of physical space in network infrastructure. With support for multiple interfaces, including Ethernet and TDM, the device ensures compatibility with a wide range of network elements. This versatility makes it an attractive choice for operators looking to streamline their operations while maintaining the ability to scale as demand grows.

The Alcatel 4324 also boasts enhanced service differentiation through Quality of Service (QoS) functionalities, enabling network administrators to prioritize data traffic according to specific service requirements. This feature is crucial for maintaining optimal performance for critical applications, such as VoIP and video conferencing, which are highly sensitive to latency and packet loss.

In terms of technology, the Alcatel 4324 supports MPLS (Multiprotocol Label Switching), allowing for more efficient data routing across complex networks. This technology enhances traffic engineering capabilities, enabling operators to optimize bandwidth usage and improve overall network efficiency. Coupled with MPLS, the support for IP-based and ATM-based services broadens the utility of the device across various networking environments.

The architecture of the Alcatel 4324 is built for reliability and redundancy, ensuring minimal downtime and consistent service availability. Features such as loop-free topologies and resilient routing protocols are integrated to safeguard against potential network failures. Additionally, the device supports advanced management and monitoring capabilities, simplifying the operational tasks of network teams and enabling proactive issue resolution.

Security is also a top priority with the Alcatel 4324, incorporating robust encryption standards and secure access policies to protect sensitive data as it traverses the network.

Finally, the Alcatel Carrier Internetworking Solutions 4324 aligns with emerging trends in the telecommunications industry, including the push towards virtualization and cloud-based services. Its flexibility and high performance make it a valuable asset for service providers navigating the complexities of modern data networks. With the Alcatel 4324, organizations can build a more agile, responsive, and efficient networking infrastructure, ensuring they remain competitive in an ever-changing marketplace.