Alcatel Carrier Internetworking Solutions 4324 manual Pin Outs, Access Point Status LEDs

Page 34

OmniAccess 4324: Installation Guide

2Access Point Status LEDs

Each LED represents the status of APs connected to a specific port on the switch. During operation, the LEDs provide the following information:

TABLE B-3AP Status LED

Status

Description

 

 

Red (solid)

An AP on this port has failed (highest precedence).

Red (flashing)

An air monitor on this port has detected an unsecured AP.

 

The AP is attached to your network but is not listed in the

 

switch security policies. If security policies are enabled,

 

clients are not granted access to your network through the

 

unsecured AP.

Green

An air monitor on this port has detected interference. The

(flashing)

interfering device (AP or other radio source) has been

 

detected by your valid APs, but has no wired presence on

 

your network.

Amber (solid)

Load balancing is enabled on this port or an AP has reached

 

the maximum number of clients it is configured to support.

Green (solid)

All detected APs on this port are operating as expected.

Off

No AP is detected on the port (lowest precedence).

 

 

The LED states in Table B-3are listed in order of precedence (highest to lowest). If more than one AP is connected to the port, the state with the highest precedence is displayed.

Pin Outs

The RJ-45 female connector pin-outs are shown in Figure B-2 :

10/100 Mbps

Ethernet

LNK/

POE

ACT

 

RJ-45 Female

 

 

Pin-Out

 

 

1

ETH Rx+

(POE negative*)

2

ETH Rx–

(POE negative*)

3

ETH Tx+

(POE positive*)

4

Serial TxD**

(POE positive*)

5

Serial TGND** (POE positive*)

6

ETH Tx–

(POE positive*)

7

Serial RxD**

(POE negative*)

8Serial RGND** (POE negative*)

Direction

Input

 

 

 

*POE optional

 

 

 

Output

 

 

 

**Serial optional

 

 

FIGURE B-2FE Network Port Pin-outs

20

Part 031640-00

May 2005

Image 34
Contents OmniAccess 4324TM Copyright Industry Canada Class a FCC Class aVcci Class a CE Class a Safety EU Class aContents Serial & Power Over Ethernet Physical Description & LEDs Pin Outs Cables GE Uplink PortsPreface Overview of this ManualRelated Documents Text ConventionsContacting Alcatel OmniAccess 4324 Installation Guide Alcatel Wireless LAN Solution To the Network ManagerPlanning the location of access points and air monitors Physical installation of the Alcatel Wireless LAN SwitchInitial configuration of the Alcatel Wireless LAN Switch Deployment SummaryAdvanced configuration of the Alcatel Wireless LAN Switch Physical installation of the Alcatel Wireless Access PointsMonitoring and maintenance OmniAccess 4324 Installation Guide Xiv Features System OverviewPhysical Description System Indicator LEDsPower StatusGE uplink ports Fans/heat exhaust on sideOmniAccess 4324 Installation Guide Installing the Chassis Pre-Installation ChecklistPrecautions Requirements Rack Mounting KitSelecting a Location Cool, non-condensing ventilationMounting the Chassis 2Attaching the Rack Mounting BracketsAttach the Alcatel Wireless LAN Switch to the rack 3Mounting the Alcatel Wireless LAN SwitchAdhere to clearance requirements 4Keep Clear ZonesVerify you understand the procedure and all precautions Connecting PowerAttach the power cord to a proper electrical outlet Check for the appropriate operation indicators Verifying the InstallationCheck for the proper power indicators Check the fans to verify they are workingOnce the system has passed the initial power-up test Component Name Power Number Rating Units Subtotal Power ManagementTotal POE power required in Watts OmniAccess 4324 Installation Guide Ports Gigabit Ethernet GE portsFE Network Ports Serial & Power Over EthernetOmniAccess 4324 FE Network Ports Physical Description & LEDsFE Network Ports Status DescriptionAccess Point Status LEDs Pin OutsAP Make and Model CablesSerial Alcatel Spoe Adapter GE Uplink Ports Physical Description and LEDsApproved GBICs Gbic Type Vendor Module IDGbic Type Characteristics CablesSerial Console Port Port & Adapter Pin OutsCommunications Settings Baud Rate Data Bits Parity Stop Bits Flow ControlPhysical SpecificationsSpecification EnvironmentCertifications Page OmniAccess 4324 Installation Guide

4324 specifications

The Alcatel Carrier Internetworking Solutions 4324 represents a significant leap in leveraging advanced networking technologies for service providers and enterprises. This robust solution is designed to meet the increasing demands for high-capacity data transport and versatile routing capabilities in an evolving telecommunications landscape.

One of the standout features of the Alcatel 4324 is its high port density, which allows for efficient use of physical space in network infrastructure. With support for multiple interfaces, including Ethernet and TDM, the device ensures compatibility with a wide range of network elements. This versatility makes it an attractive choice for operators looking to streamline their operations while maintaining the ability to scale as demand grows.

The Alcatel 4324 also boasts enhanced service differentiation through Quality of Service (QoS) functionalities, enabling network administrators to prioritize data traffic according to specific service requirements. This feature is crucial for maintaining optimal performance for critical applications, such as VoIP and video conferencing, which are highly sensitive to latency and packet loss.

In terms of technology, the Alcatel 4324 supports MPLS (Multiprotocol Label Switching), allowing for more efficient data routing across complex networks. This technology enhances traffic engineering capabilities, enabling operators to optimize bandwidth usage and improve overall network efficiency. Coupled with MPLS, the support for IP-based and ATM-based services broadens the utility of the device across various networking environments.

The architecture of the Alcatel 4324 is built for reliability and redundancy, ensuring minimal downtime and consistent service availability. Features such as loop-free topologies and resilient routing protocols are integrated to safeguard against potential network failures. Additionally, the device supports advanced management and monitoring capabilities, simplifying the operational tasks of network teams and enabling proactive issue resolution.

Security is also a top priority with the Alcatel 4324, incorporating robust encryption standards and secure access policies to protect sensitive data as it traverses the network.

Finally, the Alcatel Carrier Internetworking Solutions 4324 aligns with emerging trends in the telecommunications industry, including the push towards virtualization and cloud-based services. Its flexibility and high performance make it a valuable asset for service providers navigating the complexities of modern data networks. With the Alcatel 4324, organizations can build a more agile, responsive, and efficient networking infrastructure, ensuring they remain competitive in an ever-changing marketplace.