Alcatel Carrier Internetworking Solutions 4324 manual Cables, AP Make and Model

Page 35

Appendix B

Cables

The type of cable required for each port depends on the device being connected:

zDirect connection to a SPOE compatible device.

This requires an 8-conductor Category 5 UTP Ethernet cable with an RJ-45 male connector. A straight-through cable is required to preserve POE voltage polarity.

The port should be connected to the intended device either directly or using a SPOE adapter with no intervening hubs, routers, switches, or other network equipment.

Alcatel SPOE adapters separate the serial and FE portions of the cable and route them to their individual ports on the connected device. There are two adapter models:

z CA-SPOE-ADAPT-1 adapts the Ethernet cable for DB-9 serial and RJ-45 FE devices.

z CA-SPOE-ADAPT-2 adapts the Ethernet cable for RJ-45 serial and RJ-45 FE devices.

The Alcatel SPOE adapters are compatible with the following APs:

TABLE B-4Alcatel SPOE Adapter Compatibility

AP Make and Model

POE

Serial

Alcatel SPOE Adapter

 

 

 

 

Alcatel APs

Yes

Yes

CA-SPOE-ADAPT-1

Cisco 340

No

Yes

CA-SPOE-ADAPT-1

Cisco 350

Yes

Yes

CA-SPOE-ADAPT-1

Cisco 1100

Yes

No

CA-SPOE-ADAPT-1

Cisco 1200

Yes

Yes

CA-SPOE-ADAPT-2

SMC EZ Connect

No

Yes

CA-SPOE-ADAPT-1

2755W

 

 

 

zDirect connection to a POE compatible device.

This requires a 4- or 8-conductor Category 5 UTP Ethernet cable with an RJ-45 male connector. A straight-through cable is required to preserve POE voltage polarity.

For POE, the port should be connected directly to the intended device with no intervening hubs, routers, switches, or other network equipment.

zConnection to a regular 10/100 Mbps Ethernet segment

This requires a 4- or 8-conductor Category 5 UTP Ethernet cable with an RJ-45 male connector. The port detects MDI/MDX and automatically adjusts for straight-through or crossover cables.

The maximum length for FE cables is 100 meters (325 feet).

Ports 21

Image 35
Contents OmniAccess 4324TM Copyright Vcci Class a CE Class a FCC Class aIndustry Canada Class a EU Class a SafetyContents Pin Outs Cables GE Uplink Ports Serial & Power Over Ethernet Physical Description & LEDsOverview of this Manual PrefaceText Conventions Related DocumentsContacting Alcatel OmniAccess 4324 Installation Guide To the Network Manager Alcatel Wireless LAN SolutionDeployment Summary Physical installation of the Alcatel Wireless LAN SwitchInitial configuration of the Alcatel Wireless LAN Switch Planning the location of access points and air monitorsMonitoring and maintenance Physical installation of the Alcatel Wireless Access PointsAdvanced configuration of the Alcatel Wireless LAN Switch OmniAccess 4324 Installation Guide Xiv System Overview FeaturesStatus System Indicator LEDsPower Physical DescriptionFans/heat exhaust on side GE uplink portsOmniAccess 4324 Installation Guide Pre-Installation Checklist Installing the ChassisPrecautions Rack Mounting Kit RequirementsCool, non-condensing ventilation Selecting a Location2Attaching the Rack Mounting Brackets Mounting the Chassis3Mounting the Alcatel Wireless LAN Switch Attach the Alcatel Wireless LAN Switch to the rack4Keep Clear Zones Adhere to clearance requirementsAttach the power cord to a proper electrical outlet Connecting PowerVerify you understand the procedure and all precautions Check the fans to verify they are working Verifying the InstallationCheck for the proper power indicators Check for the appropriate operation indicatorsOnce the system has passed the initial power-up test Total POE power required in Watts Power ManagementComponent Name Power Number Rating Units Subtotal OmniAccess 4324 Installation Guide Gigabit Ethernet GE ports PortsPhysical Description & LEDs Serial & Power Over EthernetOmniAccess 4324 FE Network Ports FE Network PortsStatus Description FE Network PortsPin Outs Access Point Status LEDsSerial Alcatel Spoe Adapter CablesAP Make and Model Physical Description and LEDs GE Uplink PortsGbic Type Vendor Module ID Approved GBICsCables Gbic Type CharacteristicsPort & Adapter Pin Outs Serial Console PortBaud Rate Data Bits Parity Stop Bits Flow Control Communications SettingsEnvironment SpecificationsSpecification PhysicalCertifications Page OmniAccess 4324 Installation Guide

4324 specifications

The Alcatel Carrier Internetworking Solutions 4324 represents a significant leap in leveraging advanced networking technologies for service providers and enterprises. This robust solution is designed to meet the increasing demands for high-capacity data transport and versatile routing capabilities in an evolving telecommunications landscape.

One of the standout features of the Alcatel 4324 is its high port density, which allows for efficient use of physical space in network infrastructure. With support for multiple interfaces, including Ethernet and TDM, the device ensures compatibility with a wide range of network elements. This versatility makes it an attractive choice for operators looking to streamline their operations while maintaining the ability to scale as demand grows.

The Alcatel 4324 also boasts enhanced service differentiation through Quality of Service (QoS) functionalities, enabling network administrators to prioritize data traffic according to specific service requirements. This feature is crucial for maintaining optimal performance for critical applications, such as VoIP and video conferencing, which are highly sensitive to latency and packet loss.

In terms of technology, the Alcatel 4324 supports MPLS (Multiprotocol Label Switching), allowing for more efficient data routing across complex networks. This technology enhances traffic engineering capabilities, enabling operators to optimize bandwidth usage and improve overall network efficiency. Coupled with MPLS, the support for IP-based and ATM-based services broadens the utility of the device across various networking environments.

The architecture of the Alcatel 4324 is built for reliability and redundancy, ensuring minimal downtime and consistent service availability. Features such as loop-free topologies and resilient routing protocols are integrated to safeguard against potential network failures. Additionally, the device supports advanced management and monitoring capabilities, simplifying the operational tasks of network teams and enabling proactive issue resolution.

Security is also a top priority with the Alcatel 4324, incorporating robust encryption standards and secure access policies to protect sensitive data as it traverses the network.

Finally, the Alcatel Carrier Internetworking Solutions 4324 aligns with emerging trends in the telecommunications industry, including the push towards virtualization and cloud-based services. Its flexibility and high performance make it a valuable asset for service providers navigating the complexities of modern data networks. With the Alcatel 4324, organizations can build a more agile, responsive, and efficient networking infrastructure, ensuring they remain competitive in an ever-changing marketplace.