AMX HD-RD, HD-RS installation instructions Installation Instructions, Overview, Important Notes

Installation Instructions	Designer-Style Maestro® Remotes
	HD-RD, -RS
Please Read Before Installing	120/127 V ~, 50/60 Hz
Overview
The HD-RD Remote Dimmer and the HD-RS Remote
Switch are for use with HomeWorks Maestro Dimmers and
Switches.
Up to nine HD-RD Remote Dimmers may be used with a
HomeWorks Wired or RF Maestro Dimmer, and up to nine
HD-RS Remote Switches may be used with a HomeWorks
Wired or RF Maestro Switch.
Important Notes	HD-RD	HD-RS

Codes: Install in accordance with all local and national elec- trical codes.

Danger: These controls must not be used to con- trol equipment which is not visible from every con- trol location. They must also not be used to con- trol equipment which could create hazardous situ-

ations such as entrapment if operated accidentally. Examples of such equipment which must not be operated by these controls include (but are not limited to) motorized gates, garage doors, industrial doors, microwave ovens, heating pads, etc. It is the installer’s responsibility to ensure that the equipment being controlled is visible from every control location and that only suitable equipment is connect- ed to these controls.

Overheat Damage: To reduce the risk of overheating and possibly damaging other equipment, do not install

to control receptacles or motor-operated appliances.

Environment: Ambient operating temperature:

0-40°C, 32-104°F, 0-90% humidity, non-condensing. Indoor use only.

Spacing: If mounting one control above another, leave at least 4 1/2" (114mm) vertical space between them.

Wallplates: Lutron Claro® and Satin ColorsTM wallplates are recommended for best color match and aesthetic appear- ance. Do not paint controls or wallplates.

Cleaning: To clean, wipe with a clean damp cloth. DO NOT use any chemical cleaning solutions.

Wallboxes: Lutron recommends using 3-1/2" (89mm) deep wallboxes for easier installation. Several controls may be installed in one multigang wallbox - see Multigang Installations (page 2).

Remotes: Use only Lutron® HomeWorks Maestro Remote Dimmers (HD-RD) with HRD/HWD-6D, -6ND, -10D, -10ND, and -5NE controls. Use only Lutron HomeWorks Maestro Remote Switches (HD-RS) with HRD/HWD-8ANS controls. Up to 9 HD-RD or HD-RS controls may be used with a HomeWorks Maestro Dimmer or Switch. Mechanical 3- or 4- way switches will not work.

1