AMX HD-RD Local Operation, Lamp Replacement, Remote Dimmer Operation, Remote Switch Operation

Local Operation

Pressing the Tapswitch on any Dimmer, Switch, or Remote will alternately turn the lights ON and OFF. For HD-RD, the ON level will be the level previously set using the Dimming Rocker. Press and hold the top or bottom of the Dimming Rocker to raise or lower the light level.

Double-tapping the Tapswitch on the HD-RD will turn the lights ON to full. Pressing and holding the Tapswitch for 1/2 second (while ON) activates a 10-second long fade- to-off.

Lamp Replacement

For routine lamp replacement, remove power from the fixture(s) by sliding the Front-Accessible Service Switch (FASS) to the OFF position (left). After replacing lamps, slide the FASS back to the ON position (right) to restore power.

Danger - For any procedure other than routine lamp replacement, power must be disconnected at the main electrical panel.

Remote Dimmer Operation

Tapswitch

Tap on/off

Dimming Rocker

Press to Brighten

Press to Dim

FASSTM

OFF ON Front

Accessible

Service

Switch

Remote Switch Operation

Tapswitch

Tap on/off

FASS

OFF ON Front

Accessible

Service

Switch

5