D-Link DES-3224 manual Delete Vlan Menu, Vlan Name

Page 60

10/100 Auto Negotiation Switch User’s Guide

All ports will have a status of available on this panel, even after they have been selected as part of a VLAN. There is nothing on this panel that indicates the port is already part of a VLAN.

Follow these steps to create a VLAN:

1.Enter the name of the VLAN you are creating.

2.Select the ports you want to include in the VLAN and toggle the space bar to change the status from Available to Selected.

3.Select Save and press Enter.

Delete VLAN Menu

The Delete VLAN menu, displayed in Figure 28, is used to delete VLANs.

Figure 28: Delete VLAN menu

VLAN Name

Is the name of the VLAN.

Delete

After you have created a VLAN, this column will have the option to delete it.

Follow these steps to delete VLANs:

1.Select the VLAN you want to delete in the Delete column.

2.Toggle the space bar to Yes to delete the VLAN.

3.Select Save and press Enter.

Managing the DES-3224

50

Image 60

Contents DES-3224 10/100 Auto Negotiation Switch User’s Guide Link Limited Warranty Hardware North, Central, and South America FCC Warning Wichtige Sicherheitshinweise Page Table of Contents Page Page Page About This Guide AudienceOrganization Features IntroductionFront Panel Side Panels MDI-Uplink port MDI-X portsRear Panel Management MethodsLocal Console Management Telnet ManagementUpdating Firmware Installing the DES-3224 Installation OptionsUnpacking the DES-3224 Power On Desktop/ Shelf InstallationRack Installation Connecting the DES-3224 to the Network Cable SpecificationsCable Diagram Cable Requirements Ports MDI-II PortMDI-X Port RS-232 PortConnecting the DES-3224 to the DES-5024 and Hubs DES-3224 to DES-3224 ConnectionPower LED LEDsDES-3224 LED Panel Speed/ Link/ Activity LEDFull/ Half LED Utilization LEDs Managing the DES-3224 Local Console ManagementTelnet ∙ Parity None ∙ Stop bits ∙ Flow Control None∙ Default User Name D-Link ∙ Default Password D-Link LogHelp Message Help MessageSpacebar System Configuration Switch Port 1-8, 9-16, 17-24 ConfigurationSpanning Tree Configuration Console ProgramSystem Configuration Menu Snmp Management ConfigurationVlan Port Management Trunking Port ManagementSystem Reset Factory Reset to Default Config ValuesSoftware Update System InformationBoot Prom Firmware Version System Information MenuHardware Revision Software VersionLAN Default Gateway System DescriptionSystem Name System LocationSystem Reset System ResetFactory Reset Factory ResetFactory Reset Confirmation System Rate Control Advantages of Store and ForwardDisadvantages of Store and Forward Advantages of Cut-Through Disadvantages of Cut-ThroughSoftware Update Menu Software UpdateSoftware Update Transfer Message Displayed as Eeprom is Being Written User Account Management User Account Change MenuCreate New User Password Confirm PasswordAccess Level User NameDelete Users StatusDelete Change Password Old PasswordNew Password Switch Port Configuration Switch Port Configuration MenuState Physical Port StatePriority Spanning Tree Configuration Spanning Tree Configuration MenuSTA Operation Levels Forward Delay Time Spanning Tree AlgorithmBridge Priority Root CostRoot Bridge Root PortSnmp Management Configuration Snmp Management Configuration MenuSnmp Manager Setting Access RightSnmp Community String Snmp Trap Manager Setting Authentication FailureCold Start Link Change EventPage Vlan Port Management Vlan Port Management MenuVlan Port Management menu Create/ View Vlan New Vlan NamePort # TrunkGroupDelete Vlan Menu Vlan NameModify Vlan Menu Virtual LAN NameVlan Modify menu Trunking Port Management Menu Trunking Port Management menuCreate New Trunking Port New Trunking Group NameName Delete Trunking Port Trunking PortModify Trunking Port Trunking Port NameTrunking Port Modify menu Troubleshooting Problem SolutionPower LED is Off System Error LED Indicators DES-3224 Technical Specifications Switch SpecificationsPort Specifications General EMI Access Level IndexUser Name 34, 35