10/100 Auto Negotiation Switch User’s Guide
3. Select Save and press Enter.
Modify Trunking Port
The Modify Trunking Port panel, displayed in Figure 34, enables you to Modify Trunking Ports.
Figure 34: Modify Trunking Port
Trunking Port Name
The names of all Trunked Ports appear in this column.
Follow these steps to modify Trunked Ports:
1.Select the name of the appropriate Trunked Port.
2.Press Enter.
3.You will see the Modify Trunking Port panel shown in Figure 35. Use this panel to modify a Trunking Group. Trunk1 is shown as an example.
Managing the | 56 |