D-Link DES-1012 manual Setup, Rack Installation

Page 16

10/100 Fast Ethernet Switch User’s Guide

Setup

Consider the following when setting up the Switch:

♦The power outlet should be within 1.82 meters of the device.

♦Visually inspect the power cord and see that it is fully secured to the AC power connector.

♦Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy objects on the Switch.

Rack Installation

The Switch can be mounted in an EIA standard size, 19-inch rack, which can be placed in a wiring closet with other equipment. To install, attach the mounting brackets on the switch’s front panel (one on each side) and secure them with the screws provided.

Figure 1A, Attaching the mounting brackets to the Switch

Then, use the screws provided with the equipment rack to mount the Switch in the rack.

6	Unpacking and Setup

Image 16

Contents DES-1012 10/100 Fast Ethernet Switch User’s Guide Limited Warranty Hardware Link Offices for Registration and Warranty Service Trademarks Page Table of Contents Viii About this Guide PurposeTerms/Usage Overview of this User’s Guide10/100 Fast Ethernet Switch User’s Guide Introduction Fast Ethernet TechnologySwitching Technology Features Performance Features Unpacking Setup UnpackingSetup Rack InstallationPower On LED IndicatorsPower Failure Identifying External Components Front PanelRear panel view of the Switch Rear PanelLED Indicators Switch LED indicators10/100 Fast Ethernet Switch User’s Guide Connecting Switch PC to SwitchHub to Switch 10Base-T HubHub Without Uplink MDI-II Port 100Base-TX HubUsing a Straight Cable Configuring the Port Speed & Duplex ModeUsing a Crossover Cable Switch to Switch Other Devices Console Management Program OverviewNavigating the Console Program Screens Ain M enu Goto system sub menu Configuring the Console Port Submenu Field Description Set port ENABLE/DISABLE Port Counter PKT 10/100 Fast Ethernet Switch User’s Guide Specifications Technical10BaseT Performance Specification RJ-45 PINStandard Category 3 cable, RJ-45 pin assignments Optional 100BASE-FX Module Link SYSTEMS, INC Registration Card