D-Link DE-809TP, DE-809TC manual Connecting Thin Coaxial Segment

Page 22

Connecting Thin Coaxial Segment

The BNC port on Mini Hub model DE-809TC is used to connect to a thin coaxial segment. Connect a T-connector to the BNC connector, then connect both ends of the T-connector to the thin coaxial cable. If the thin coaxial segment terminates at the hub, attach a 50-ohm terminator to one end of the T-connector.

10	Installation

Image 22

Contents Fifth Edition Jan Limited Warranty Link Offices for Registration and Warranty Service Page Trademarks Class B for Model DE-809TC Vcci II Warning For Model DE-809TC Page Table of Contents Page Port connectors on back panel of Mini Hubs 10BASE-T Ethernet Mini Hubs User’s GuideIntroduction 10BASE-T Ethernet Mini Hubs User’s Guide Page Page Page Installation Mounting Hub on WallInstallation Connecting AC Power Adapter Connecting UTP Segments 10BASE-T Ethernet Mini Hubs User’s Guide Connecting Thin Coaxial Segment Cascading Hubs Through Thin Coaxial Cable Cascading Hubs Through UTP Cable Installation Diagnostic LEDs & Troubleshooting PowerDiagnostic LEDs on front panel of Mini Hubs Collision Link/Rx for each UTP portPartition for each UTP port Uplink10BASE-T Unshielded Twisted-Pair UTP Cable 10BASE2 Thin Coaxial CableAC power adapter model AD-071AD AC Power AdaptersAC power adapter model AD-071A AC power adapter model AD-071ABAC Power adapter model AD-071AJ Technical Specifications DE-809TP10BASE-T Ethernet Mini Hubs User’s Guide DE-809TC Cables, Connectors & AC Power Adapters Offices Registration Card