FUNAI DRV-B2737, DRV-B2734 owner manual Digital audio for better sound quality only for DVD

DRV_B2737_B2734.book Page 17 Thursday, March 31, 2005 10:04 PM

AV output jack (Scart)

Scart cable (supplied)

AV2 (Rear)

DVD/VCR		DVD		DVD/VCR
AV2(DECODER)	DIGITAL	AUDIO	S-VIDEO
	AUDIO OUT	OUT	OUT	AERIAL
	OPTICAL COAXIAL		L
AV1(TV)				RF OUT

R

*The unit is for the DRV-B2737.

Recording from a camcorder or other Audio-Video equipment with no Scart output jack (AV3)

If no S-Video input jack is available, connect to VIDEO input jack on the front panel using an RCA Video cable.

Change the setup when using S-VIDEO IN jack. (See page 32.)

AV3 (Front)

OPEN/CLOSE
DUBBING	SELECT	STOP PLAY RECORD
VCR	SELECT	DVD
		-VIDEO VIDEO	-

S-Video cable	Audio cable
(not supplied)
	(not supplied)

S-VIDEO AUDIO *The unit is for

OUT OUT the DRV-B2737.

The connections illustrated above are optional for better sound.

1 For clear digital sound quality, use the DIGITAL AUDIO OUT (OPTICAL (DRV-B2737 only) or COAXIAL) jack to connect your digital audio equipment.

If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

Connecting a Dolby Digital™ decoder, DTS decoder or MPEG decoder

•Connecting multi-channel Dolby Digital decoder allows you to enjoy the 5.1ch Dolby Digital surround system as well as DTS decoder, 5.1 channel surround system.

•After connecting to a Dolby Digital decoder, set “DOLBY DIGITAL” to “Stream” in the AUDIO menu. (See page 60.)

•After connecting to a DTS decoder, set “DTS” to “ON” in the AUDIO menu. (See page 60.)

•After connecting to a MPEG decoder, set “MPEG” to “Stream” in the AUDIO menu. (See page 60.)

Connecting to an MD deck or DAT deck

•The audio source recorded in Dolby Digital 5.1 channel surround format cannot be recorded using an MD or DAT deck as a digital sound.

•If not connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “PCM” in the AUDIO menu. Playing back a DVD using incorrect settings may generate noise distortion, and damage speakers.

•Set “DOLBY DIGITAL,” and “MPEG” to “PCM” and set “DTS” to “OFF” in the AUDIO menu for connecting to an MD or DAT deck.

•You can use AUDIO OUT jacks for the connection of your audio system.

Getting Started

Digital audio for better sound quality (only for DVD)

Digital audio		Dolby Digital decoder,
		DTS decoder or
input jacks
		MPEG decoder, etc.
OPTICAL COAXIAL
or	Coaxial cable			DIGITAL		DVD
						AUDIO	S-VIDEO
	(not supplied)		AUDIO OUT			OUT	OUT
			OPTICAL COAXIAL				L
							R
	Optical cable
	(not supplied)
		DVD/VCR		DVD			DVD/VCR
		AV2(DECODER)	DIGITAL	AUDIO	S-VIDEO
			AUDIO OUT	OUT	OUT		AERIAL
	*The unit is for	AV1(TV)	OPTICAL COAXIAL		R		RF OUT
					L
	the DRV-B2737.

After you have completed connections

Switch the input selector on your TV to an appropriate external input channel. For details, refer to the Owner’s Manual of your TV.

Note

•Connect this unit directly to the TV. If the AV cables are connected to a VCR, pictures may be distorted due to the effects of the copy protection system.

17 EN