FUNAI DRV-B2734, DRV-B2737 owner manual Slow forward / Slow reverse playback, Zoom, Marker Setup

DRV_B2737_B2734.book Page 42 Thursday, March 31, 2005 10:04 PM

Playing back discs

3 Press [PLAY P] to resume playback.

Note

•Only step by step forward is available when playing back Video CDs.

Slow forward / Slow reverse playback

Video	VR
DVD-V DVD-RW	DVD-RW DVD-R

DVD+RW DVD+R VCD

1 During playback, press [PAUSE p], then press [f] or [r].

Each time you press [f] or [r], the approximate speed change as follows. (The sound will remain muted.)

FWDFWDFWDFWDFWDFWD

x1/4 REV x1/8 REV x1/16 REV Pause REV x1/16 REV x1/8 REV x1/2

To return to normal playback, press [PLAY P].

Hint

•Forward / reverse speeds are indicated with icons as follows.

Forward (Approx. Speed): x1 / 16:

x1 / 8:

x1 / 2:

Reverse (Approx. Speed): x1 / 16:

x1 / 8:

x1 / 4:

Note

•Only slow forward is available when playing back Video CDs.

Zoom

Video	VR
DVD-V DVD-RW	DVD-RW DVD-R

DVD+RW DVD+R VCD JPEG

1 During playback, press [ZOOM].

1 1 0:00:00 DVD-Video

1.2

1.5 2.0

Four options are available, x1.0, x1.2, x1.5 and x2.0. These are displayed excluding the current zoom rate.

Hint

•You can also select the zoom function by pressing

[DISPLAY]. In this case, press [DISPLAY] first,

select the icon using [Cursor L / P], and then press [ENTER].

2 Select the desired zoom factor to zoom using [Cursor U / D], then press [ENTER].

The zoom area is displayed.

3 Select the desired zoom position using [Cursor U / D / L / P], then press [ENTER].

Zoom playback will start.

Hint

•To exit the zoom menu, press [ZOOM] at step 1.

•To cancel the zoom function, select x1.0 using [Cursor U / D], then press [ENTER].

Note

•If selecting a smaller factor than that currently selected, the zoom area is not displayed.

•You cannot slide the zoomed picture on some JPEG files.

Marker Setup

Video	VR
DVD-V DVD-RW DVD-RW DVD-R
DVD+RW DVD+R	CD VCD
	(PBC OFF)

You can assign a specific point on a disc to return later.

1 During playback, press [DISPLAY].

2 Select the icon using

[Cursor L / P], then press [ENTER].

Marker setup menu for DVD-Video mode

1 1 0:00:00 DVD-Video

Marker setup menu for Audio CD mode

1 0:00:00 Audio CD

3 Select the desired marker number using [Cursor U / D]. When the disc reaches the desired point, press [ENTER].

The title (track) number and the time are displayed.

4 To return to the marker later, select the desired marker number using [Cursor U / D], then press [ENTER].

EN 42