FUNAI DRV-B2737 Other operations, Hi-Fi Stereo Sound System, Mode Audio output Display on

DRV_B2737_B2734.book Page 65 Thursday, March 31, 2005 10:04 PM

Other operations

VCR

Press [VCR] first.

To cue or review picture during playback (Picture Search):

Press [FWD f] or [REW r] during playback. Press it again and the unit will search in super high speed.

To freeze the picture on TV screen during playback (Still mode):

Press [PAUSE p]. Each time you press the button, the picture will be forwarded frame by frame.

If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing the [PROG. U / D].

If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped.

Counter Reset:

Press [CLEAR].

To play back in slow motion:

Press [SLOW] during playback or the still mode.

If the noise bars appear on the TV screen, you can reduce it by pressing [PROG. U / D].

Note

•Still / Slow / Pause mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head.

•To return to play back from the Picture Search / Still / Slow mode, press [PLAY P].

Hi-Fi Stereo Sound System

This unit will record and playback Hi-Fi stereo sound. This unit will receive stereo and bilingual broadcasts and it is possible to record in several ways and to play back the sound.

Selecting the Sound Mode

You can select each mode by pressing [AUDIO] on the remote control. Each mode is indicated on the TV screen as following.

• During reception of bilingual broadcasts

Mode	Audio output	Display on
		the TV screen
Main	Main audio from the both	Main
	speakers
Sub	Sub audio from the both	Sub
	speakers
Main /	• Main audio from the left	Main
Sub	speaker	Sub
	• Sub audio from the right
	speaker

Note

•If you play back non-Hi-Fi tapes, the unit will play back automatically in monaural even if you select any mode.

•If the stereo signal becomes weak, the broadcast is automatically recorded in monaural.

VCR functions

65 EN