FUNAI DRV-B2734 One-touch timer recording, Index search, Time search, Normal Recording100 800

DRV_B2737_B2734.book Page 64 Thursday, March 31, 2005 10:04 PM

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record tab. To record on it later, cover the hole with cellophane tape.

Record tab

One-touch timer recording

VCR

This feature allows you to set the recording length simply by pressing [REC / OTR].

1 Turn on the unit and insert a recordable tape.

Make sure that the TV input is set on the unit.

2	Press [VCR	].
3	Select the recording speed using
	[REC SPEED] (See page 63.).

4 Select the desired channel to record using [PROG. U / D] or [the Number buttons].

5 Press [REC / OTR] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen.

One-touch timer recording will start.

0:30

(Normal Recording)1:00

8:00 7:30

• When the unit reaches the specified time, it will be

turned off automatically.

• To change the recording length during one-touch

timer recording, press [REC / OTR] repeatedly until

the desired length appears.

• To cancel one-touch timer recording within the

specified time, press [STOP S].

Hint

• The remaining recording time will appear on the TV

screen during one-touch timer recording. Press

[DISPLAY] to see it on the TV screen.

VCR	Note
functions	• If VCR one-touch timer recording is completed
	during DVD playback or recording, the VCR will be
	in stop mode and the DVD keeps the current mode.
	• You cannot use the pause function during one-touch
	timer recording.
	• When one-touch timer recording is finished and the
	power is turned off, the unit will switch to the timer-
	standby mode automatically if a timer recording has
	been programmed. Press [T-SET]to cancel the
	timer-standby mode to use the unit continuously.

Search

Index search

VCR

1	Press [VCR	].
2	During tape playback, press
	[SEARCH] so that the index search
	menu appears.

3 Enter the number of recordings you wish to skip using

[the Number buttons] within 30 seconds.

4 Press [f] or [r] to start index search.

If you want to go in the forward direction, press

[f].

If you want to go in the reverse direction, press [r].

After index search, the VCR will play back the tape automatically.

Note

•Every time a tape is recorded, an index mark is written on the tape.

Time search

VCR

This feature allows you to go to a specific point on a tape by entering the exact amount of time you wish to skip in order to reach the point.

1	Press [VCR	].
2	During tape playback, press
	[SEARCH] repeatedly so that the
	Time search menu appears.

3 Enter your desired time to skip using [the Number buttons] within 30 seconds.

4 Press [f] or [r] to start time search.

If you want to go in the forward direction, press [f].

If you want to go in the reverse direction, press [r].

After time search, the unit will play back the tape automatically.

Note

•These functions are not available during recording.

•Press [STOP S] to stop the search.

•If the tape reaches the end during a Search, this unit will cancel the search and rewind the tape.

EN 64