FUNAI DRV-B2737 One-touch timer recording OTR, Checking the recording picture and sound quality

DRV_B2737_B2734.book Page 27 Thursday, March 31, 2005 10:04 PM

Checking the recording picture and sound quality

Video VR

DVD-RW DVD-RW DVD-R

Before recording on a DVD, you can confirm the quality of the picture and sound with the recording speed you selected.

1 Make sure that the unit is in STOP or REC mode and a DVD is inserted correctly.

2 Press [REC MONITOR].

The TV will display the programme and output the sound you are about to record in the quality of the picture and sound (determined by the recording speed) you selected.

•If you want to change the recording speed (to improve the recording quality), press

[REC SPEED] repeatedly.

The recording speed is changed each time you press the button.

1H(XP) 2H(SP) 4H(LP) 6H(EP) 8H(SLP) 10H(SEP)

•You cannot change the recording speed during recording.

3 Press [REC MONITOR] again to exit.

Hint

•If you press [REC MONITOR] while receiving the bilingual broadcast, the sound to be recorded is output.

One-touch timer recording (OTR)

Video VR

DVD-RW DVD-RW DVD-R

This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space remaining for the time you set.

When the recording finishes the recorder automatically switches to the timer-standby mode.

1 Turn on the unit and insert a recordable disc.

Make sure that the TV input is set on the unit.

2 Press [DVD ].

3 Select the recording speed using [REC SPEED] (See page 22.).

Make sure that the recording format is set to the desired mode (see page 24).

4 Select the desired channel to record using [PROG. U / D] or

[the Number buttons].

5 Press [REC / OTR] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen.

One-touch timer recording will start.

0:30

(Normal Recording) 1:00

8:00 7:30

• When the unit reaches the specified time, it will

be turned off automatically.

• To change the recording length during one-

touch timer recording, press [REC / OTR]

repeatedly until the desired length appears.

• To cancel one-touch timer recording within the

specified time, press [STOP S].

Hint

• The remaining recording time will appear on the TV

screen during one-touch timer recording. Press

[DISPLAY] to see it on the TV screen.

• The remaining recording time will be displayed on

the front panel display during one-touch timer

recording.

• Unlike timer recording, you can perform the

following operations during one-touch timer

recording.

- Turn off the power.

- Use [REC / OTR] or [STOP S].

Recording

27 EN