FUNAI DRV-B2734, DRV-B2737 Basic recording, Setting Bilingual Recording Audio, Press DVD

DRV_B2737_B2734.book Page 26 Thursday, March 31, 2005 10:04 PM

Recording

5 Select “Stereo” or “Bilingual” using [Cursor U / D], then press [ENTER].

External input Audio DVD

Stereo

Bilingual

6 Press [SETUP] to exit.

Hint

Stereo: Both modes of Video and VR are recorded in stereo.

Bilingual: The sound you set by “Bilingual Recording Audio” is recorded in Video mode.

Both sounds of “Main” and “Sub” are recorded in VR mode. You can select audio modes during playback.

Setting Bilingual Recording Audio

Video

DVD-RW DVD-R

You can select either “Main” or “Sub” audio to record a bilingual broadcast in Video mode.

1 In stop mode, press [SETUP].

2 Select “Advanced Setting Menu” using [Cursor U / D], then press [ENTER].

If it has already appeared, proceed to step 3.

3 Select “Recording” using

[Cursor U / D], then press [ENTER].

4 Select “Bilingual Recording Audio” using [Cursor U / D], then press [ENTER].

5 Select “Main” or “Sub” using [Cursor U / D], then press [ENTER].

	Bilingual Recording Audio	DVD
	Main
Sub

6 Press [SETUP] to exit.

Basic recording

Video	VR
DVD-RW	DVD-RW DVD-R

Follow the steps below to record a TV programme.

1 Turn on the unit and insert a recordable disc.

Make sure that the TV input is set on the unit. This operation may take a few moments to complete.

2 Press [DVD ].

3 Select the recording speed using [REC SPEED] (See page 22.).

Make sure that the recording format is set to the desired mode (see page 24).

4 Select the desired channel to record using [PROG.U / D] or

[the Number buttons].

5 Press [REC / OTR] to start recording.

The ● mark will be displayed for 5 seconds.

To pause the recording, press [PAUSE p]. Press [REC / OTR] or [PAUSE p] to restart the recording.

6 Press [STOP S] to stop the recording.

This operation may take a few moments to complete.

Hint

•You can change the channel while in the REC pause mode.

Note

•Recording starts immediately and continues until the disc is full or you stop recording.

•If the clock is not set, the date and time space next to title names in the Original or Playlist will be blank.

•You cannot mix two formats on DVD-RW discs. If you insert a previously recorded disc, changing the recording format is not possible even if you change it in the Setting menu.

•You cannot change the recording speed while in the REC or REC pause mode.

•It is possible to record video only in the PAL system.

•During recording, if a signal other than PAL is decoded (such as NTSC), recording is paused.

EN 26