FUNAI DRV-B2734 Finalising discs, Setting a disc to protect, To cancel the disc protect

Finalising

10%

Yes

No

To cancel finalising (DVD-RW only):

At step 4, press [STOP S], select “Yes,” then press [ENTER]. Finalising is cancelled and the unit switches to stop mode.

Do you want to cancel ? Yes No

DVD

Finalising will start.

Finalise

“Easy Setting Menu” or “Advanced Setting Menu” will appear.

2 Select “Disc” using [Cursor U / D], then press [ENTER].

3 Select “Finalise” using

[Cursor U / D], then press [ENTER].

4 Select “Yes” using [Cursor U / D], then press [ENTER].

In stop mode, press [SETUP].

1

You will need to finalise discs to play them back in other players.

Finalising may take from several minutes up to an hour. (A disc recorded in Video mode can take up to 15 minutes. A disc recorded in VR mode can take up to 60 minutes.)

A shorter recording period on the disc will require a longer time period for finalisation. Do not unplug the mains cable during finalisation.

Insert a recordable disc before finalising.

DVD-RWDVD-RW

DVD-R

VR

DRV_B2737_B2734.book Page 34 Thursday, March 31, 2005 10:04 PM

10 Press [DUBBING].

DVD to VCR duplication will start.

11 Press [STOP S] to stop the recording.

Note

•When you turn off the unit after setting the Dubbing Mode to DVD→VCR, the setting will be set to VCR→DVD automatically.

•Dubbing Mode is available only if the tape or disc is not copy protected.

•You cannot change the output mode during VCR to DVD or DVD to VCR duplication.

Finalising discs

Video

Recording

Setting a disc to protect

VR

DVD-RW

To prevent accidental over-recording, editing or erasing of recordings, you can protect them using the Setting menu.

Insert a recordable disc.

1 In stop mode, press [SETUP].

“Easy Setting Menu” or “Advanced Setting Menu” will appear.

2 Select “Disc” using [Cursor U / D], then press [ENTER].

3 Select “Disc Protect OFF → ON” using [Cursor U / D], then press [ENTER].

4 Select “Yes” using [Cursor U / D], then press [ENTER].

The disc is protected.

Note

•The Disc Protect setting is available only when a disc recorded in VR mode is inserted.

•You can select only “Disc Protect ON → OFF” when a protected disc is inserted.

To cancel the disc protect:

•Select “Disc Protect ON → OFF” at step 3, then select “Yes.”

•If you insert a disc protected with this unit, “Disc Protect ON → OFF” will appear instead of “OFF → ON.”

EN 34