FUNAI DRV-B2734, DRV-B2737 owner manual Before you start, Precautions, Laser Safety, Power Supply

DRV_B2737_B2734.book Page 2 Thursday, March 31, 2005 10:04 PM

Before you start

Before you start

Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Laser Safety

This unit employs a laser. Only a qualified service personnel should remove the cover or attempt to service this unit, due to the possibility of eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK

MECHANISM.

Power Supply

The power supply is connected and the unit is live when the mains cable is plugged into a 220–240 V, 50 Hz AC outlet. To operate the unit, press [STANDBY-ON].

WARNING: LIVE PARTS INSIDE.

DO NOT REMOVE ANY SCREWS.

Caution

1.Do not attempt to open the cabinet. There are no parts inside you can service. Refer all servicing to qualified service personnel.

2.Slots and openings in the cabinet at the sides and underneath are provided for ventilation. To ensure reliable operation and to protect the unit from overheating, these openings must not be blocked or covered.

Avoid installation in enclosed spaces such as bookcases unless suitable ventilation is provided.

3.Keep the unit away from radiators and other heat sources.

4.Avoid use near strong magnetic fields.

5.Do not push objects of any kind into the unit through the cabinet slots or openings as they could touch electrically live parts or short circuit parts resulting in a fire or electric shock.

6.Do not spill liquid on the unit. If liquid is spilled and enters the unit, consult qualified service personnel.

7.Do not stand the unit vertically. Use the unit in a horizontal (flat) position only.

8.Before attempting to operate the unit, make sure that the timer recording mode is “OFF.”

9.This product is in Stand-by mode when turned off while the mains cable is connected.

10.Do not place any combustible objects on the device. (Candles, etc.)

11.Before moving the unit, be sure to remove any discs and unplug the mains cable from the AC outlet.

EN 2