10/100 Fast Ethernet Switch User’s Guide
First Time Connecting To The Switch
The Switch supports
Note: The passwords used to access the Switch are case sensitive; therefore, “S” is not the same as “s.”
When you first connect to the Switch, you will be presented with the first login screen (shown below). Press Ctrl+R (hold down the Ctrl key, press the R key, and release both keys) to call up the screen, if the first login screen does not appear. Also Ctrl+R can be used at any time to refresh the screen.
Figure 6-1. Initial Screen, first time connecting to the Switch
Move the cursor to OK and press Enter (Note: Leave the User Name and Password fields blank). You will see the Main Menu shown below:
34 | Using the Console Interface |