D-Link DES-3208 manual Index, BOOTP&TFTP, 48 Tftp only

Page 85

100 M (speed indicator), 15 100BASE-TX networks, 2 100Mbps Fast Ethernet, 1 1024-1518 Octs, 56 128-255 Octs, 56 256-511 Octs, 56

512-1023 Octs, 56

64 Octs, 56

65-127 Octs, 56 AC inputs, 68

AC Power Connector, 13 AC power cord, 6 Access Rights

read only, 52 read/write, 52 Accessory pack, 6

Adding a New User, 42 Adding and Deleting Users, 42 Age Time, 57

Ageing out of filtering information, 26

Aging Time very long, 26 very short, 26

Aging Time, definition of, 26 Aging Time, range of, 26 Alleviating network loop problems,

31

Attaching the mounting brackets. See Rack Installation

Auto polarity detection, 4 Automatic learning, 26 Automatic topology re-configuration

Spanning Tree Algorithm, 27 Boot File Name, 48

Boot Protocol

INDEX

BOOTP&TFTP, 48 TFTP ONLY, 48

Boot Server IP Address, 48 BOOTP (the BOOTstrap Protocol),

48

BOOTP broadcast, 46 BOOTP protocol, 46 BOOTP server, 46

Bridge Level, STA Operation Level Bridge Identifier, 28

Bridge Priority, 28 Designated Bridge, 28 Root Bridge, 27 Root Path Cost, 28

Bridge MIB (RFC 1268), 5 Bridge Priority, 33

Broadcast Rx (Broadcast Frames Received), 56

Bytes Rx (Bytes Received), 56 Bytes Tx (Bytes Sent), 56 Change the Port Configuration, 53 Changing the Protocol Parameters,

62

Changing the SNMP Trap Manager Configuration settings, 51

Changing the STAP Port Parameters, 63

Changing theSNMP Manager Configuration parameters settings, 52

Changing your Password, 41 CLEAR COUNTER, 54 Collisions, 55

Community name, definition of, 51 Community names

Private, 52

Image 85

Contents DES-3208 10/100 Fast Ethernet Switch User’s Guide Wichtige Sicherheitshinweise Warranties Exclusive Limited Warranty Software Trademarks Page Page Table of Contents Switch Management Switch Monitoring Page Terms About this GuideOverview of this User’s Guide Appendix C, MII Port Specifications Fast Ethernet Technology IntroductionSwitching Technology Performance features FeaturesPorts Management Unpacking Unpacking SetupDesktop or Shelf Installation Setup100 Fast Ethernet Switch installed on a Desktop or Shelf Rack InstallationPower on Power Failure Front Panel Identifying External ComponentsRear panel view of the DES-3208 Rear Panel10/100 Fast Ethernet Switch User’s Guide DES-3208 Switch LED indicators LED Indicators10/100 Fast Ethernet Switch User’s Guide PC to Switch Connecting SwitchDES-3208 Switch connected to a 10BASE-T or 100Base-TX Hub Hub to Switch10Base-T Hub Hub without Uplink MDI-II port100Base-TX Hub Using straight cable Switch to Switch other devicesUsing crossover cable Using straight cable Local Console Managament Switch ManagementIP Addresses and Snmp Community Names Console port RS-232 DCETraps MIBs Packet Forwarding Spanning Tree Algorithm Aging TimeSTA Operation Levels Automatic topology re-configurationOn the Port Level User-Changeable Parameters10/100 Fast Ethernet Switch User’s Guide Illustration of STA Before Applying the STA Rules User-selective STA parameters Connecting to the Switch Using the Console InterfaceConsole Usage Conventions First Time Connecting To The Switch Steps to create a Super User or General User Super and General User PrivilegesMain Menu for General User Super User and General User Privileges Login on the Switch Console by Registered Users Choose Change Password Changing Your PasswordAdding a New User Adding and Deleting UsersDeleting a User TCP/IP Settings Setting up the SwitchUsing the Console Interface System Restart Setting Out-of-band management and console settings11. Out-of-Band/Console Setting Menu Software Updates12. Software Update Menu System Configuration MenuSnmp Trap Manager Configuration Snmp Management Settings14. Snmp Trap Manager Configuration Menu Snmp Security Community Names Snmp Manager Configuration16. Port Configuration Menu Port ConfigurationDisplaying Port Statistics Switch Monitoring17. Statistics Counters Spanning Tree Algorithm Parameters Forwarding Table 18. STA, Forwarding Table Custom Filtering Table19. Custom Filtering Table Using the Console Interface Protocol Parameters 21. Protocol Parameters Stap Port Parameters22. Stap Port Parameters Resetting the SwitchFactory Reset System Reset24. Factory Reset General Technical SpecificationsPhysical and Environmental Performance RJ-45 PIN SpecificationRJ-45 Connector pin assignment Figure C-1. The Standard MII connector MII Connector SpecificationsMII Connector Pin Assignment Table C-1. The MII standard pin assignment Index BOOTP&TFTP, 48 Tftp onlyIndex MDI-II Index Page Offices Registration Card