D-Link DES-1108 manual ProductPackageOverviewContents

Page 3

Section 1 - Product Overview

ProductPackageOverviewContents

•D-Link DES-1108 8-port Switch

•Manual and Warranty on CD

•Four (4) Rubber Feet

•Wall Mount Kit

•Power Adapter

Setup

The setup of the DES-1108 can be performed using the following steps:

•The power outlet should be within 1.82 meters (6 feet) of the Switch.

•Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.

•Do not cover the ventilation holes on the sides of the Switch, and make sure there is adequate ventilation around it.

•Do not place heavy objects on the switch.

D-Link DES-1108 User Manual

3

Image 3

Contents Page Table of Contents ProductPackageOverviewContents Switching Technology IntroductionFast Ethernet Technology Product Overview Features Product Overview Link/Activity PowerHardware Overview Front Panel LEDsDC Power Jack Rear Panel ConnectionsAuto MDI/MDI-X Ports Connecting the Switch InstallationPort Speed & Duplex Mode Mounting the Switch on the Wall Mounting on a cement wallMounting on a wood wall Troubleshooting Does the DES-1108 switch have an uplink port?What is Store-and-Forward switching? Check your IP address Networking BasicsStep Highlight Internet Protocol TCP/IP and click Properties StepDES-1108 Speciﬁcations Technical SpeciﬁcationsFCC Class B, CE Class B MAC Address Learning Automatic updateRJ-45 Connector pin assignment RJ-45 Pin SpeciﬁcationsPhone Support Contacting Technical SupportLimited Warranty WarrantyNon-Applicability of Warranty Limited Software WarrantyDisclaimer of Other Warranties What Is Not CoveredCopyright Statement Limitation of LiabilityGoverning Law TrademarksFCC Statement CE Mark WarningRegistration