D-Link DES-1005D manual

Page 14
allocated for each port, while controlling the data flow between the transmit and receive nodes to guarantee against all possible packet loss.

allocated for each port, while controlling the data flow between the transmit and receive nodes to guarantee against all possible packet loss.

The Switch is an unmanaged 10/100 Fast Ethernet Switch that offers solutions in accelerating small Ethernet workgroup bandwidth. Other key features are:

Uplink/ MDI-II (media dependent interface) port for uplink to another switch, hub or repeater.

Store and forward switching scheme capability. As the result of complete frame checking and error frame filtering, this scheme prevents error packages from transmitting among segments.

NWay Auto-negotiation for any port. This allows for auto-sensing of speed (10/100Mbps) thereby providing you with automatic and flexible solutions in your network connections.

Flow control for any port. This minimizes dropped packets by sending out collision signals when the port’s receiving buffer is full. Note that flow control is only available in half duplex mode.

Data forwarding rate per port is at wire-speed for 100Mbps speed.

Data forwarding rate per port is at wire-speed for 10Mbps speed.

Data filtering rate eliminates all error packets, runts, etc., per port at wire- speed for 100Mbps speed.

Data filtering rate eliminates all error packets, runts, etc., per port at wire- speed for 10Mbps speed.

4

Image 14
Contents RECYCLABLE VCCI Warning FCC CertificationsCE Mark Warning Warranty Period LIMITED WARRANTYProduct excluding power supplies and fans, if purchased and delivered in the fiftyWhat You Must Do For Warranty Service What Is Not Covered IS” WITHOUT ANY WARRANTY OF ANY KIND INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY 90 DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT ABOUT THIS GUIDE SWITCH TO SWITCH OTHER DEVICES TECHNICAL SPECIFICATIONSRJ-45PIN SPECIFICATION B. Using crossover cableOverview of this User’s Guide PurposeTerms/Usage ABOUT THIS GUIDEPage Fast Ethernet Technology INTRODUCTIONSwitching Technology Features allocated for each port, while controlling the data flow between the transmit and receive nodes to guarantee against all possible packet loss Unpacking SetupUNPACKING AND SETUP Page IDENTIFYING EXTERNAL COMPONENTS Front PanelRear Panel LED Indicators Page Page PC to Switch CONNECTING THE SWITCHA. 10BASE-THub Hub to SwitchA. Using straight cable B. 100BASE-TXHubA. Using straight cable Switch to Switch other devicesB. Using crossover cable B. Using crossover cablePort Speed & Duplex Mode TECHNICAL SPECIFICATIONS GeneralPerformance Physical and EnvironmentalRJ-45P IN SPECIFICATION 耟 The standard cable, RJ-45pin assignment耟 The standard RJ-45receptacle/connector
Related manuals
Manual 4 pages 23.69 Kb