RJ-45 P IN SPECIFICATION
When connecting your 5-port 10/100Mbps Dual Speed Ethernet Switch to another switch, a bridge or a hub, a modified crossover cable is necessary. Please review these products for matching cable pin assignment.
The following diagram and tables show the standard RJ-45 receptacle/connector and their pin assignments for the switch-to-network adapter card connection, and the stra ight
/crossover cable for the Switch-to-switch/hub/bridge connection.
| RJ-45 Connector pin assignment |
Contact | | Media Direct Interface Signal |
| | |
1 | | TX + (transmit) |
| | |
2 | | TX - (transmit) |
| | |
3 | | Rx + (receive) |
| | |
4 | | Not used |
| | |
5 | | Not used |
| | |
6 | | Rx - (receive) |
| | |
7 | | Not used |
| | |
8 | | Not used |
| | |
耟 The standard cable, RJ-45 pin assignment
15
