D-Link DES-1005D manual Unpacking And Setup

Page 15

UNPACKING AND SETUP

UNPACKING AND SETUP

This chapter provides unpacking and setup information for DSS-5+.

Unpacking

Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items:

One DSS-5+ 5-port 10/100Mbps Dual Speed Ethernet Switch

One external power adapter

This User’s Guide

If any item is found missing or damaged, please contact your local reseller for replacement.

Setup

The setup of DSS-5+ can be performed using the following steps:

The surface must support at least 1.5 Kg for the Switch.

The power outlet should be within 1.82 meters (6 feet) of the Switch.

Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.

Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy objects on the Switch.

5

Image 15

Contents RECYCLABLE FCC Certifications CE Mark WarningVCCI Warning fans, if purchased and delivered in the fifty LIMITED WARRANTYProduct excluding power supplies and Warranty PeriodWhat You Must Do For Warranty Service What Is Not Covered IS” WITHOUT ANY WARRANTY OF ANY KIND INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY 90 DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT ABOUT THIS GUIDE B. Using crossover cable TECHNICAL SPECIFICATIONSRJ-45PIN SPECIFICATION SWITCH TO SWITCH OTHER DEVICESABOUT THIS GUIDE PurposeTerms/Usage Overview of this User’s GuidePage INTRODUCTION Fast Ethernet TechnologySwitching Technology Features allocated for each port, while controlling the data flow between the transmit and receive nodes to guarantee against all possible packet loss Setup UNPACKING AND SETUPUnpacking Page Front Panel Rear PanelIDENTIFYING EXTERNAL COMPONENTS LED Indicators Page Page CONNECTING THE SWITCH PC to SwitchB. 100BASE-TXHub Hub to SwitchA. Using straight cable A. 10BASE-THubB. Using crossover cable Switch to Switch other devicesB. Using crossover cable A. Using straight cablePort Speed & Duplex Mode General TECHNICAL SPECIFICATIONSPhysical and Environmental Performance耟 The standard cable, RJ-45pin assignment RJ-45P IN SPECIFICATION耟 The standard RJ-45receptacle/connector

Related manuals

Manual 4 pages 23.69 Kb