Installing Your MX2456RM, Operation, Control Panel

SWITCHERS

INSTALLING YOUR MX2456RM

Step 1. Make sure that the power input is set to the proper AC voltage for the country of usage. An incorrect setting may result in unit damage not covered by warranty.

Step 2. Connect the power cord to the unit and plug it into the power outlet.

Step 3. Connect the cables from the video sources and the audio sources (computers, VCR, etc.) to the input channels and connect the display devices (monitor or projector) and the appropriate audio equipment (mixer, amplifier, etc.) to the outputs. For better results use shielded, high-quality coaxial cables.

Step 4. Test all the required switching features. If you experience difficulties or abnormal switching, you may wish to reset the unit to the factory defaults to make sure that you have not entered an incorrect operation mode. To reset the switcher, turn the power ON and OFF. Then turn the power ON again while pressing and holding the “RESET” button. After a brief delay, all LED’s should blink ON and OFF. A beeping sound will be heard several times indicating that the switcher has been factory reset.

Step 5. Verify that the display and audio equipment operates properly and results in perfect images and sound.

OPERATION

7.1 CONTROL PANEL

1.When a button is pressed and released a beeper will sound once. If a button is pressed and held, a beeper will sound several times.

2.Default video and audio inputs are selected simultaneously by pressing and releasing one of the video input buttons. LED’s that represent selected inputs on the control panel and connector board should turn ON.

3.When selecting audio inputs and video inputs independently, press the AUDIO BREAK AWAY mode button. If at any time you need to return the MX2456RM Switcher to the previous mode position, press the AUDIO BREAK AWAY mode button.

4.Before setting the VIDEO EQ mode, you must determine the length of cable that is connected to each of the video inputs. To select the appropriate equalization, follow steps a-d below.

a)Select Video Input

b)Press and release the VIDEO EQ UP button as many times as needed to turn the video equalizer to the correct position. Each time this button is pressed, it equalizes for the next 25 ft of cable. (For equalization of 100ft of cable, press the button four times; for cable 150ft, press button six times; and for cable 375ft, press the button fifteen times and so on.)

c)To set the selected equalization to memory, press and hold the VIDEO EQ UP and DOWN buttons simultaneously for 2 seconds.

d)Repeat step b and c for equalization of any video input.

5.To set the AUTO ROTATE mode, use the AUTO ROTATE Up and Down buttons to select the appropriate rotation time. Video inputs will rotate as they connect to the output within the selected auto rotation time. Audio inputs will also rotate, if AUDIO BREAK AWAY mode was not previously selected. Equalization is still active.

MX2456RM specifications

The Altinex MX2456RM is a highly regarded multimedia matrix switcher specifically designed to meet the demands of modern AV systems. This versatile device offers seamless switching capabilities for various audio and video signals, making it an ideal solution for educational institutions, corporate environments, and event venues.

One of the standout features of the MX2456RM is its capacity to accommodate multiple input and output configurations. With support for up to 24 inputs and 56 outputs, it provides flexibility for complex setups, allowing users to route signals from various sources to desired destinations. This capability is particularly useful in environments where multiple presentations or media streams occur simultaneously.

The unit supports a wide range of video resolutions, ensuring compatibility with various devices. It handles signals up to 4K resolution at 60 Hz, which is crucial for maintaining high-quality visuals in today’s high-definition content landscape. Additionally, the MX2456RM supports multiple video formats, including HDMI and SDI, providing versatility for different AV equipment.

Another noteworthy aspect of the MX2456RM is its sophisticated control options. Users can manage the matrix switcher through a user-friendly web interface, enabling easy configuration and operation from any web-enabled device. This simplifies the control process significantly, making it accessible to users with varying levels of technical expertise.

The MX2456RM also features advanced audio processing capabilities. With support for audio embedding and de-embedding, users can manage audio signals seamlessly alongside video, providing a comprehensive AV experience. This functionality is essential for ensuring synchronized audio-video output, especially during presentations or live events.

Reliability is another critical characteristic of the MX2456RM. Altinex has designed this unit with robust hardware and features such as hot-swappable modules, ensuring minimal downtime during operation. This reliability is especially important in professional environments where AV performance is critical.

In summary, the Altinex MX2456RM is an exceptional multimedia matrix switcher that combines extensive input-output options, high-resolution support, user-friendly control, and reliable performance. It is an ideal choice for organizations looking to enhance their AV capabilities and streamline their media management processes. Whether it’s for educational use, corporate presentations, or live events, the MX2456RM stands out as a powerful tool for professionals in the AV industry.