DGS-3100 Series Firmware Release Notes
v1.00.36
4When user is copying and pasting a group of long commands, some of the commands will not work.
5When typing: ‘show fdb aging time’ and ‘?’ afterwards system will display other options. Actually, there shouldn’t be additional values in this command
6When user deletes access profile through the web, the profile details will remain.
7Users can not configure more than 5 user accounts via the Web UI.
8When user configures ACLs on the Web UI, the system will not check the TCP Flag parameter which is configured as “unset (0)” and will only check the parameter “set (1)”.
9When pasting commands, the prompt will be displayed in the wrong position.
10When configuring MAC_base_access_control and copying the configuration file to TFTP server. The function will not work when user restore the configuration file back to the switch.
11If the user configures a port to guest VLAN and also configures the port as untagged in the same VLAN, the port will not belong to any VLAN after the user changes the “port control” to “force authorize” state..
12When user tries to create an IP access profile with mask of all “0” The system will accepted it.
First release
*
Known Issues:
|
| Firmware |
|
| Issues |
|
| Workaround | ||
|
| Version |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| v3.60.28 |
|
| None |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| v3.50.23 |
|
|
| None |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The LLDP TLV information, the “Port ID” and |
|
|
|
|
|
| v3.00.43 |
|
|
| “Port ID Subtype”, displays Hex string in |
|
| User can see alphanumeric string |
|
|
|
|
|
| Web UI instead of displaying alphanumeric |
|
| in CLI. |
| |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| one. (DI20090330000015) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| v2.50.43 |
|
|
| None |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| 1 It is impossible to activate the third |
|
| Two web sessions work properly | |
|
|
|
|
|
| web session |
|
| within the stack, in standalone | |
|
| v2.00.47 |
|
|
|
|
|
| mode there is no problem at all. | |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| 2 It is possible to configure the stacking |
|
| The stacking port will still be a |
|
|
|
|
|
|
| port (port 49, 50) as LACP port. |
|
|
| |
|
|
|
|
|
|
|
| stacking even though it was |
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
13