New Features, Firmware Version | D-Link 3.60.28 guide

Command: show firmware information

"*" designates that the image was selected for the next boot

3.DGS-3100# download boot 172.17.5.124 dgs_31xx_boot-10105.rfb

08-Feb-2000 23:25:10 %COPY-I-FILECPY: Files Copy - source URL tftp://172.17.5.12 4/dgs_31xx_boot-10105.rfb destination URL Unit all flash://BOOT

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!08-Feb-2000 23:25:49 %COPY-N-TRAP: The copy operation was completed successfully

Copy: 524304 bytes copied in 00:00:39 [hh:mm:ss]

4.DGS-3100# reboot

This action may take a few minutes

You haven't saved your changes. Are you sure you want to continue ? (Y/N)[N] Y Are you sure you want to proceed with system reboot now? (Y/N)[N] Y

New Features:

v3.60.28

1Time-based PoE

2Dynamic VLAN Assignment

3Voice VLAN

4IPv6 ACL

5Cable Diagnostics

6Password Encryption

7Display statistics information of error packets on CLI and Web GUI

8Be able to configure serial port’s parameters (baud rate, time out) via Web GUI

9Be able to login switch with blank user name and password

10Link Aggregation algorithm improvement.

• Based on source and destination MAC addresses • Based on source and destination IP addresses

• Based on IP and MAC’s source and destination addresses

11Configuration filtering: Filter the configuration file with specified key word while displaying it on CLI

12All ports can be the source port in Port Mirror function

13When broadcast storm reaches the configured threshold, switch will