Altinex 400-0026-004 manual PRECAUTIONS/SAFETY Warnings

Page 3

MATRIX SWITCHERS

PRECAUTIONS/SAFETY WARNINGS

1

Please read this manual carefully before using your HOMERUN Series Matrix Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your HOMERUN Series Matrix Switcher and to prevent fire and shock hazard. Please read them carefully and heed all warnings.

1.1 GENERAL

Unauthorized personnel shall not open the unit since there are high-voltage components inside.

Qualified Altinex service personnel, or their authorized representatives must perform all service.

1.2 INSTALLATION

For best results, place the HOMERUN Series Switchers on a flat, level surface in a dry area, away from dust and moisture. To prevent fire or shock, do not expose this unit to rain or moisture.

Handle your HOMERUN Switcher carefully. Dropping or jarring can damage the internal components. Do not place heavy objects on top of the HOMERUN Switcher.

Do not place the HOMERUN Switcher in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components. Do not pull the power cord or any signal cables that are attached to the HOMERUN. If the HOMERUN is not used for an extended period of time, disconnect the power cord from the power outlet.

1.3 RACK-MOUNT INSTALLATION

Use only Altinex supplied rack-mount ears for mounting the HOMERUN Switcher into a rack.

The maximum operating ambient temperature is 45 degrees Centigrade.

When installing the HOMERUN Series Switcher into a rack, distribute individual units evenly, otherwise hazardous conditions may be created by an uneven weight distribution. Allow

1-U rack space for every 4 HOMERUN Switcher modules for air circulation. This will reduce heat build up and will prolong the life of the HOMERUN Switcher.

Connect the HOMERUN Series Switcher to a properly rated power outlet.

Reliable grounding of the HOMERUN Series Switcher should be maintained by using the provided 3-prong power cord only. Furthermore, make sure that the rack is properly grounded.

1.4 CLEANING

Unplug the HOMERUN Series Switcher’s power cord before cleaning.

Clean surfaces with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit.

1.5 FCC NOTICE

This device complies with the part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.

Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference in which case the user will be required to correct the interference at his own expense.

2

Image 3
Contents Homerun Series Introduction Table of ContentsPRECAUTIONS/SAFETY Warnings Technical Specifications About Your Homerun Matrix SwitcherDiagram of FRONT/BACK Panel Matrix Switchers Application Diagram RS-232 port of Homerun Computer or Switcher Control System Installing Your SwitcherReset Selected Channels Press the F1 OperationBack Panel Manual Control F1+HOLD RS-232 Control of the SwitcherProgramming Commands Press FunctionIkkOmmA BAUDnCODEn IkkOmmSIXXOmmA IkkOXXSIkkOXXA IXXOmmSCommand Unit a Parameter Unit a Unit BConnection ID1 ID2 ID3 ID4 Control CommandsIkkOmmUnP IkkOmmIkkOmmP IkkOmmUnIxxoxxx Control Operation Front Panel OperationProgramming Operation Set Baud Rate Windows Hyper Terminal ProgramHomerun modules Altinex Homerun Control Program ConnectSave Clear RecallSpace DeleteTable Mount Brackets AccessoriesOptional Control Accessories Rack Mounting BracketsCP-01/CP-02/CP-03 Troubleshooting GuideContact Information Limited WarrantyAltinex Policy Return Policy