MATRIX SWITCHERS
[ERR], just the version number; for example [3.2] or [3.5].
[VISn]
n= 1 Enable VIS n = 0 Disable VIS
This command enables or disables vertical interval switching, if the option is installed on the HOMERUN Matrix Switcher.
7.2.3 CONTROL COMMANDS
These control commands are used for
UNIT ID - n
ID NUMBER LED’s
ID1 |
| ID2 |
| ID3 | ID4 |
|
|
|
|
|
|
controlling the switcher. They can be part of a normal program to operate the switcher. These command actions are lost if power is disconnected from the unit, or if the unit is reset in any way.
[xxxxxF] - Send feedback.
Adding F at the end of any command will provide feedback in the form of [OK] or [ERR].
0
1
2
3
4
5
6
7
8
9
off
on
off
on
off
on
off
on
off
on
off
off
on
on
off
off
on
on
off
off
off
off
off
off
on
on
on
on
off
off
off
off
off
off
off
off
off
off
on
on
Otherwise there will be no feedback, except with the [VERN] command.
[UIDn]
n= Unit ID number. It could be any number from 1 to 9.
This command sets the unit ID number. A total of up to 10 unit ID’s can be assigned to HOMERUN modules, using ASCII code, for individual control of each unit. Additional units can be controlled using hex codes.
If n=1, the switcher listens to all commands. If n=0, the switcher does not listen to any command.
Table 3 provides the relation between the Unit ID number and the LED’s on the back panel of the unit. In other words, once an ID number is assigned to any module through an
Table 3 Unit ID LED's of Back Panel
The Unit ID command will allow only units with the same ID number to respond to any
When independent switching of various modules is required first issue the [UID1] command to make all modules respond to common commands. Then issue different [UIDn] commands to each group of switchers to communicate with particular modules. The [UIDn] command only should be issued once prior to communicating with the individual modules.
[UIDnE]
n = Unit ID number 2 to 9
This command selects the exclusive switcher level to control. The level is controlled based on the Unit ID
13