Allied Telesis manual AT-8000S/24 Front Panel, AT-8000S/24 Back Panel

Page 11

Product Description

AT-8000S/24 Front Panel

The following figure illustrates the AT-8000S/24 front panel.

Figure 3: AT-8000S/24 Front Panel

The AT-8000S/24 front panel is configured as follows:

•24 10/100Mbps Ports — RJ-45 ports designated as 10/100Base-T. The RJ-45 ports are designated as ports Ports 1 - 24.

•2 10/100/1000Base-T Copper Ports — There are two copper 10/100/100Base-T ports designated on the switch as ports 25R and 26R. These ports are paired with the two SFP slots designated on the switch as ports 25 and 26. Together these four ports form the Combo ports shown in Figure 3.

•2 SFP Ports— There are two SFP slots which support either a 100Base-FX or a 1000Base-X (fiber) connection and are designated on the switch as ports 25 and 26. This SFP slot is paired with the two 10/100/ 1000Base-T copper ports which is designated on the switch as port 25R and 26R. Together these four ports form the Combo ports shown in Figure 3.

•DB-9 Console port — An asynchronous serial console port supporting the RS-232 electrical specification. The port is used to connect the device to the console managing the device.

•Reset Button — Button to reset the device.

•Mode Button — Selects the port LED indications.

AT-8000S/24 Back Panel

The following figure illustrates the AT-8000S/24 back panel.

Figure 4: AT-8000S/24 Back Panel

The AT-8000S/24 back panel is configured as follows:

•Power Connector — AC power supply interface.

•2 Stacking Ports — Two RJ-45 ports device stacking.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Allied Telesis AT-8000S Installation GuidePage Table of Contents Stacking Allied Telesis AT-8000S Switch Switch Installation GuideTable of Contents How This Guide is Organized Allied Telesis AT-8000S SwitchInstallation Guide PrefaceContacting Allied Telesis Contacting Allied TelesisProduct Description Allied Telesis AT-8000SSwitchSwitch Installation Guide Ieee 802.3 10Base-T Ieee 802.3u 100Base-TX FeaturesIeee Standards Product DescriptionAT-8000S/16 Back Panel AT-8000S/16 Front PanelAT-8000S/24 Back Panel AT-8000S/24 Front PanelAT-8000S/24POE Back Panel AT-8000S/24POE Front PanelAT-8000S/48 Back Panel AT-8000S/48 Front PanelAT-8000S/48POE Back Panel AT-8000S/48POE Front PanelLED Definitions Ports Description24/48 Port Device Stacking LEDs Mode LEDsMode LED Indications LED Description Stacking LED Indications LED Description Port LEDs10/100 Base-T Fast Ethernet RJ-45 Port LEDs Port LEDsPort Description LED Indication 10/100/1000 Base-T/Combo Ethernet RJ-45 Port LEDs10/100Base-T Fast Ethernet RJ-45 Port LED Indications SFP Port LED Indications Port Description 24/48 Port Device SFP/Combo Port LEDsCombo Port LED Indications Port Description 24/48 Port Device System LEDs Power LEDDiagnostic LED Diagnostics LED Indications LED DescriptionStacking Ports LEDs Stacking Ports LEDsSafety Precautions InstallationPreparing for Installation Preparing for Installation InstallationUnpacking Site RequirementsUnpacking Essentials Installing the DeviceDesktop or Shelf Installation Package ContentsInstalling Rubber Feet Rack InstallationConnecting the Device Connecting the DeviceConnecting the Switch to a Terminal AC Power Connection Installation Understanding the Stack Topology StackingStacking Chain Topology Stacking Chain TopologyStacking Members and Unit ID StackingPress Return or Esc. to abort and enter prom Configuring StackingEnter unit working mode 1 standalone, 2 stacking Configuring StackingStatic IP Address and Subnet Mask Initial ConfigurationConfiguration Overview ConfigurationUser Name Initial ConfigurationConfiguration Device not operating correctly TroubleshootingCannot connect using Telnet, Web browser, or Snmp software Forgot or lost the passwordTroubleshooting Appendix A. Technical Specifications Pin Connections for the 10/100/1000 Ethernet Interface Technical SpecificationsCompliance Standards Cable, Port, and Pinout InformationTxRx 2+ TxRx 3+ TxRx 4+ Technical Specifications Electrical Safety Notices Appendix B. Safety StatementsLaser Safety Notices Electrical Safety Notices Safety StatementsAllied Telesis AT-8000SSwitch Safety Statements Allied Telesis AT-8000SSwitch Telecommunications Compliance Notices Telecommunications Compliance NoticesIndex
Related manuals
Manual 188 pages 38.01 Kb

AT-8000S specifications

The Allied Telesis AT-8000S series switches are a range of advanced Layer 2 Ethernet switches designed for efficient networking in various environments. Engineered with performance, reliability, and cost-effectiveness in mind, these switches are ideal for businesses seeking to enhance their network infrastructure.

One of the main features of the AT-8000S series is its high-speed data forwarding capabilities. With support for 10/100/1000 Mbps Ethernet ports, these switches provide fast and reliable connections, enabling seamless data transfer and enhanced communication between devices. The non-blocking switching architecture ensures that full bandwidth is available at all times, maximizing throughput and reducing latency in network traffic.

The AT-8000S series incorporates advanced Layer 2 switching technologies, such as VLAN support, allowing users to segment network traffic for improved performance and security. Virtual Local Area Networks (VLANs) help isolate sensitive data and reduce unnecessary broadcast traffic, enhancing the overall performance of the network.

Quality of Service (QoS) is another significant feature integrated into these switches, prioritizing different classes of network traffic. This functionality ensures that critical applications receive the necessary bandwidth and minimal latency, which is imperative for voice over IP, video conferencing, and other latency-sensitive applications.

In terms of network management, the AT-8000S series provides a variety of options, including an intuitive web-based interface, SNMP support, and the ability to manage switch configurations through console access. This flexibility allows network administrators to monitor performance and manage configurations easily.

The switches are built for durability, featuring a robust design suitable for deployment in various environments, including temperature-sensitive areas. Power over Ethernet (PoE) capability is also available in certain models, allowing network devices like IP cameras and wireless access points to receive power through the same cable as data, simplifying installation and reducing clutter.

Allied Telesis emphasizes security within the AT-8000S series, with features such as port security, DHCP snooping, and IEEE 802.1X authentication to safeguard against unauthorized access and potential threats.

Overall, the Allied Telesis AT-8000S series provides a comprehensive networking solution tailored for modern business needs, combining performance, flexibility, and security to support a growing array of applications and devices within the network.
Top Page Image Contents