Allied Telesis AT-8000S manual Compliance Standards, Cable, Port, and Pinout Information

Page 39

Technical Specifications

Compliance Standards

The devices conform to the following compliance standards:

•The Environmental standard, per ATI QLT 1220

•RoHS compliant

•The EN50082-1 immunity standard

•The following safety standards:

–UL1950

–CSA22.2 no.950

–TUV (EN60950)

–CE

•The following EMI/Emission standards:

–FCC Class A

–EN55022 Class A

–VCCI Class A

–C-TICK

Cable, Port, and Pinout Information

This section describes the devices physical interfaces and provides information about cable connections. Stations are connected to the device ports through the physical interface ports on the front panel. For each station, the appropriate mode (Half/Full Duplex, Auto) is set.

Pin Connections for the 10/100/1000 Ethernet Interface

The switching port can connect to stations wired in standard RJ-45 Ethernet station mode using straight cables. Transmission devices connected to each other use crossed cables. The following figure illustrates the pin allocation.

Figure 21: RJ-45 Pin Allocation

The following table describes the pin allocation

Table 9: RJ-45 Pin Connections for 10/100/1000 Base-T

Pin

Use

1TxRx 1+

2TxRx 1-

Page 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Allied Telesis AT-8000S Installation GuidePage Table of Contents Stacking Allied Telesis AT-8000S Switch Switch Installation GuideTable of Contents How This Guide is Organized Allied Telesis AT-8000S SwitchInstallation Guide PrefaceContacting Allied Telesis Contacting Allied TelesisAllied Telesis AT-8000SSwitch Switch Installation GuideProduct Description Ieee 802.3 10Base-T Ieee 802.3u 100Base-TX FeaturesIeee Standards Product DescriptionAT-8000S/16 Back Panel AT-8000S/16 Front PanelAT-8000S/24 Back Panel AT-8000S/24 Front PanelAT-8000S/24POE Back Panel AT-8000S/24POE Front PanelAT-8000S/48 Back Panel AT-8000S/48 Front PanelAT-8000S/48POE Back Panel AT-8000S/48POE Front PanelLED Definitions Ports DescriptionMode LEDs Mode LED Indications LED Description24/48 Port Device Stacking LEDs Stacking LED Indications LED Description Port LEDs10/100 Base-T Fast Ethernet RJ-45 Port LEDs Port LEDs10/100/1000 Base-T/Combo Ethernet RJ-45 Port LEDs 10/100Base-T Fast Ethernet RJ-45 Port LED IndicationsPort Description LED Indication 24/48 Port Device SFP/Combo Port LEDs Combo Port LED Indications Port DescriptionSFP Port LED Indications Port Description 24/48 Port Device System LEDs Power LEDDiagnostic LED Diagnostics LED Indications LED DescriptionStacking Ports LEDs Stacking Ports LEDsInstallation Preparing for InstallationSafety Precautions Preparing for Installation InstallationUnpacking Site RequirementsUnpacking Essentials Installing the DeviceDesktop or Shelf Installation Package ContentsInstalling Rubber Feet Rack InstallationConnecting the Device Connecting the Switch to a TerminalConnecting the Device AC Power Connection Installation Understanding the Stack Topology StackingStacking Chain Topology Stacking Chain TopologyStacking Members and Unit ID StackingPress Return or Esc. to abort and enter prom Configuring StackingEnter unit working mode 1 standalone, 2 stacking Configuring StackingStatic IP Address and Subnet Mask Initial ConfigurationConfiguration Overview ConfigurationInitial Configuration ConfigurationUser Name Device not operating correctly TroubleshootingCannot connect using Telnet, Web browser, or Snmp software Forgot or lost the passwordTroubleshooting Appendix A. Technical Specifications Pin Connections for the 10/100/1000 Ethernet Interface Technical SpecificationsCompliance Standards Cable, Port, and Pinout InformationTxRx 2+ TxRx 3+ TxRx 4+ Technical Specifications Appendix B. Safety Statements Laser Safety NoticesElectrical Safety Notices Electrical Safety Notices Safety StatementsAllied Telesis AT-8000SSwitch Safety Statements Allied Telesis AT-8000SSwitch Telecommunications Compliance Notices Telecommunications Compliance NoticesIndex
Related manuals
Manual 188 pages 38.01 Kb

AT-8000S specifications

The Allied Telesis AT-8000S series switches are a range of advanced Layer 2 Ethernet switches designed for efficient networking in various environments. Engineered with performance, reliability, and cost-effectiveness in mind, these switches are ideal for businesses seeking to enhance their network infrastructure.

One of the main features of the AT-8000S series is its high-speed data forwarding capabilities. With support for 10/100/1000 Mbps Ethernet ports, these switches provide fast and reliable connections, enabling seamless data transfer and enhanced communication between devices. The non-blocking switching architecture ensures that full bandwidth is available at all times, maximizing throughput and reducing latency in network traffic.

The AT-8000S series incorporates advanced Layer 2 switching technologies, such as VLAN support, allowing users to segment network traffic for improved performance and security. Virtual Local Area Networks (VLANs) help isolate sensitive data and reduce unnecessary broadcast traffic, enhancing the overall performance of the network.

Quality of Service (QoS) is another significant feature integrated into these switches, prioritizing different classes of network traffic. This functionality ensures that critical applications receive the necessary bandwidth and minimal latency, which is imperative for voice over IP, video conferencing, and other latency-sensitive applications.

In terms of network management, the AT-8000S series provides a variety of options, including an intuitive web-based interface, SNMP support, and the ability to manage switch configurations through console access. This flexibility allows network administrators to monitor performance and manage configurations easily.

The switches are built for durability, featuring a robust design suitable for deployment in various environments, including temperature-sensitive areas. Power over Ethernet (PoE) capability is also available in certain models, allowing network devices like IP cameras and wireless access points to receive power through the same cable as data, simplifying installation and reducing clutter.

Allied Telesis emphasizes security within the AT-8000S series, with features such as port security, DHCP snooping, and IEEE 802.1X authentication to safeguard against unauthorized access and potential threats.

Overall, the Allied Telesis AT-8000S series provides a comprehensive networking solution tailored for modern business needs, combining performance, flexibility, and security to support a growing array of applications and devices within the network.
Top Page Image Contents