Allied Telesis AR700 Series manual To test a card, insert the card and enter

Page 42

42

AR700 Series Router

Figure 15: Sample output from the show cflash test command, when no test is running

Clusters available for testing Ranges:

[42645--61944]

Number of free clusters = 19300

Number of ranges = 1 Number of used clusters = 42645

To test a card, insert the card and enter:

enable cflash test start=startnumber end=endnumber

where startnumber and endnumber are positive integers within a cluster range. The endnumber must be higher than the startnumber. Cluster ranges are displayed in the output of the show cflash test command (Figure 15).

The test software will read the file allocation table and display a list of free sectors. Sectors can be tested as single sectors or as a range. The test will consist of a write/read/verify cycle.

To stop the test, use the command:

disable cflash test

To display the testing process while a test is in process, enter:

show cflash test

Figure 16: Sample output from the show cflash test command, when a test is running

Test Progress

 

 

Starting cluster

 

= 700

Ending cluster

 

= 1700

Current cluster

 

= 1185

Passed clusters

number

= 485

Passed sectors

number

= 1940

Failed clusters

number =

0

Failed sectors

number

= 0

Used Clusters encountered

= 0

Duration

4417 ms

If used when testing is not active, the previous command displays blank cluster ranges on a compact flash card (Figure 15 on page 42).

Error messages are displayed when a file write fails. Failure could be due to the card being removed or an error in the card.

C613-03087-00 Rev E

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Hardware Reference AR700 Series Router Contents Where To Find More Information IntroductionModels Covered By This Reference AR700 Series Ethernet AR700 Series RoutersHardware Reference Model Eth PortsHardware Features AR725 RouterPower Supply Redundant Power Supply RPS Pin Function Direction VCC10AR700 Series Router Do not remove the compact flash card when the LED is litAR725 LEDs and what they mean Front panel Rear panelAR745 Router Front and Rear PanelsAR700 Series Router DC Power inlet terminals on an AR745 DB25 RPS power connector pin out on the AT-AR745 AR745 LEDs and what they mean LNK/ACTAR700 Series Router AR750S Router Front PanelPower Supply PIC0 AR750S LEDs and what they meanState Function PIC1PSU Bay Two PWR03 DC installed AR750S-DP RouterAT-PWR03 Power Supplies Restart with default configurationAR700 Series Router AR750S-DP LEDs and what they mean Front Panel Switch SFP Eth AR770S RouterAsynchronous port PIC bays AR770S LEDs and what they mean Online Documentation To Access DocumentationTo install any of the tools included on the CD-ROM To view a documentTo set preferences for the AT-TFTP Server If AT-TFTP Server has not yet been installedAT-TFTP Server To load a file from AT-TFTP Server to the routerUsing Windows Terminal Hyperterminal Hardware Reference AR700 Series Router Router Start-up Force Eprom download Y? Pressing key... Forces the router to Message MeaningStart-up tests have finished Random Access Memory RAM Memory38AR700 Series Router PICBattery-Backed RAM AR725, AR745, AR770S only Onboard Flash MemoryShow file Installing and removing a compact flash card CompactFlash AR725, AR745 onlyTo test a card, insert the card and enter AR740 RPS Redundant Power Supply AT-AR725, AT-AR745 only Expansion OptionsSpecifications Dimensions AR740 RPS LEDs SFP Ports AR770S only PICs and NSMsProduct No Media Type Description PCI Accelerator Cards PACs AT-AR061 EcpacCompression Ratio Compression → encryption →//→ decryption → decompression RJ-45 Pin Function Signal Direction Asynchronous InterfacesCables and Loopback Plugs RS-232 Terminal and Modem CablesCableFigure RJ-45 Hardware Reference RJ-45 To router RJ-45 DB9 Male To router To modem Loopback Plugs for Testing Interfaces RJ45 MiniDin To switch or router To MacintoshPhysical Interface Loopback Pin Wiring Diagram Ethernet twisted pair TP loopback plugTest Facility Test failureEnable test int=portn Connect a terminal to the console port Restricted Maintenance ProceduresDiagnostics Restart the routerHardware Reference Enable diagnostics mode during start-up Key FunctionLithium Battery Replacement Contacting Us

AR700 Series specifications

The Allied Telesis AR700 Series represents a robust line of edge routers engineered for high-performance networking. These devices are aimed at delivering versatility and scalability, catering to the needs of various organizations, whether small businesses or larger enterprises. Known for their reliability and advanced features, the AR700 Series stands out as a compelling option for organizations seeking to enhance their network infrastructure.

One of the standout features of the AR700 Series is its support for advanced routing protocols. The routers are capable of handling various protocols such as OSPF, BGP, and RIP, ensuring seamless integration within diverse network environments. This capability allows organizations to efficiently manage their routing needs, optimizing data flow for enhanced performance.

In addition to its routing protocols, the AR700 Series supports powerful Quality of Service (QoS) features. This technology prioritizes network traffic based on specific requirements, ensuring that vital applications receive the necessary bandwidth. This is particularly important for businesses that rely on real-time services such as video conferencing or voice over IP (VoIP), where uninterrupted service is critical.

The AR700 Series is also equipped with advanced security features to safeguard against cyber threats. With built-in firewall capabilities, VPN support, and traffic filtering, these routers help protect sensitive data from unauthorized access and attacks. Additionally, the ability to implement VLANs (Virtual Local Area Networks) further enhances the security and manageability of the network.

Scalability is a key characteristic of the AR700 Series. Organizations can easily expand their network capabilities as they grow, with support for various interface modules. This flexibility enables businesses to adapt their infrastructure without the need for complete overhauls, making it a cost-effective solution in the long run.

Management and monitoring of the AR700 Series are also streamlined, thanks to user-friendly interfaces and comprehensive management tools. IT teams can efficiently configure, monitor, and troubleshoot the network, ensuring optimal performance and reducing downtime.

In summary, the Allied Telesis AR700 Series routers combine advanced routing capabilities, robust security features, and scalable designs to meet the evolving needs of modern networks. With support for QoS, versatile protocols, and easy management, these devices are well-equipped to handle the demands of today's data-driven environments, making them an excellent choice for organizations aiming to improve their network performance and security.
Top Page Image Contents