Allied Telesis AT-X510-52GPX, AT-X510-52GTX, AT-X510-28GTX, AT-X510-28GSX, AT-X510-28GPX Figures

Figures

Figure 1: Front Panels of the AT-x510-28GTX and AT-x510-28GPX Switches	19
Figure 2: Front Panels of the AT-x510-28GSX,AT-x510-52GTX, and AT-x510-52GPX Switches	20
Figure 3: Back Panel of the AT-x510-28GTX,AT-x510-52GTX, and AT-x510-28GSX Switches	21
Figure 4: Back Panel of the AT-x510-28GPX and AT-x510-52GPX Switches	21
Figure 5: x510 Series Management Panel	22
Figure 6: LEDs for the 10/100/1000Base-T Ports on the AT-x510-28GTX and AT-x510-52GTX Switches	33
Figure 7: LEDs for the 10/100/1000Base-T Ports on the AT-x510-28GPX and AT-x510-52GPX Switches	35
Figure 8: SFP Slot LEDs on the AT-x510-28GSX Switch	36
Figure 9: SFP+ Slot LEDs	37
Figure 10: Switch ID LED	39
Figure 11: Switch ID LED	39
Figure 12: Switch ID LEDs in the Low Power Mode	40
Figure 13: Components of the x510 Series Switches	51
Figure 14: Turning the Switch Upside Down	55
Figure 15: Removing the Rubber Feet	55
Figure 16: Attaching the Equipment Rack Brackets	56
Figure 17: Attaching the Equipment Rack Brackets (Continued)	57
Figure 18: Mounting the Switch in an Equipment Rack	57
Figure 19: Removing the Dust Plug from an SFP Slot	63
Figure 20: Installing an SFP Transceiver	64
Figure 21: Removing the Dust Cover from an SFP Transceiver	64
Figure 22: Positioning the SFP Handle in the Upright Position	65
Figure 23: Connecting a Fiber Optic Cable to an SFP Transceiver	65
Figure 24: Removing the Dust Plug from an SFP+ Slot	66
Figure 25: Installing an SFP or SFP+ Transceiver	67
Figure 26: Removing the Dust Cover from an SFP or SFP+ Transceiver	67
Figure 27: Positioning the SFP or SFP+ Handle in the Upright Position	68
Figure 28: Connecting a Fiber Optic Cable to an SFP or SFP+ Transceiver	68
Figure 29: Plugging in the AC Power Cord	70
Figure 30: Switch Initialization Messages	71
Figure 31: Switch Initialization Messages (Continued)	72
Figure 32: Switch Initialization Messages (Continued)	73
Figure 33: Connecting the Management Cable to the Console Port	75
Figure 34: User Exec Mode Prompt	76
Figure 35: SHOW STACK Command	76
Figure 36: Moving to the Global Configuration Mode	77
Figure 37: Confirmation Prompt for the NO STACK ENABLE Command	77
Figure 38: Returning to the Privileged Exec Mode	77
Figure 39: Saving the Changes with the WRITE Command	78
Figure 40: Status of a Stacking Slot When VCStack is Disabled	79
Figure 41: Status of a Stacking Slot When VCStack is Enabled	79
Figure 42: PORT Parameter in the Command Line Interface	80
Figure 43: RJ-45 Socket Pin Layout (Front View)	87

7