Allied Telesis at-8700xl series switch manual Upgrading the GUI, To upgrade the GUI

Page 38

38

AT-8700XL Series Switch User Guide

Upgrading the GUI

You can download the latest GUI resource file from the support site at http://www.alliedtelesyn.co.nz/support/at8700xl. Before you start, ensure that the switch is running the most recent release and patch files. The GUI is not part of the firmware release file, but the most recent resource file will generally only be compatible with the most recent software release. To check which files the switch is running, refer to the “Current Install” section of the command:

SHOW INSTALL

If you are updating both the release and the resource file, set the preferred release and restart the switch before installing the GUI as described below.

To upgrade the GUI

1. If required, delete the old GUI resource file

If required, you can store more than one GUI resource file on the switch at a time. If you want to delete the previous GUI resource file (for example, to save memory), you must first disable the GUI, using the command:

DISABLE GUI

Then delete the GUI resource file, using the command:

DELETE FILE=old-gui.rsc

where:

•old-gui.rsc is the name of the GUI resource file that you are replacing. Wait until FLASH compaction has finished. This will take several minutes.

Do not interrupt the switch’s power supply during FLASH compaction, under any circumstances.

If you have multiple valid resource files and releases stored on the switch, use the SET

INSTALL command to change the release and resource file the switch uses (see below).

2.Load the new file onto the switch

Download the GUI resource file for your model of switch from the website to your TFTP server. Do not rename the file.

Resource files use a fixed naming convention, which includes a product code, a language code and a version code. If you change the GUI resource file’s name, the switch will not recognise it as a valid file and you will be unable to use it for configuration.

Load the GUI resource file from your TFTP server to the switch, using the command:

LOAD FILE=filename.rsc SERVER=server

where:

•filename is the name of the GUI resource file, as shown on the support site for your switch. Do not rename the file.

•server is the IP address of the TFTP server the file is loaded from.

Software Release 2.6.1 C613-02030-00 REV B

Page 37 Page 39
Image 38
Page 37 Page 39
Contents AT-8700XL Series Switch Page Contents Switching Why Read this User Guide? ChapterWhere To Find More Information AT-8700XL Series Switch Documentation SetTechnical support Features of the AT-8700XL Series SwitchSwitching Features Management Features Layer 3 and Other FeaturesIntroduction Page Getting Started with the Command Line Interface CLI This ChapterConnecting a Terminal or PC Terminal Communication ParametersLogging Assigning an IP AddressTo change the IP address for an interface, enter the command Setting Routes Changing a Password Choosing a PasswordUsing the Commands AliasesGetting Command Line Help Setting System ParametersLocation of the switch, for example Page Getting Started with the Graphical User Interface GUI Browser and PC Setup What is the GUI?Accessing the Switch via the GUI Http Proxy Servers Establishing a Connection to the Switch Start hereOption 1 Configuring the Switch before Installation Use this procedure ifOption 2 Installing the Switch into the LAN To install the switch into the same subnet as the PCEnable IP Remoteassign Option 3 Connecting to an Installed Switch Secure Access To create an RSA key pair, use the commandSet the UTC offset System Status System StatusUsing Configuration Pages Using the GUI Navigation and FeaturesConfiguration Menu An example of a configuration page with a selection table Editable Fields Management Menu Ports GraphicMonitoring Menu Diagnostics MenuChanging the Password Configuring Multiple Devices Saving Configuration Entered with the GUICombining GUI and CLI Configuration Context Sensitive GUI HelpTo upgrade the GUI Upgrading the GUITroubleshooting Accessing the Switch via the GUI Deleting Temporary FilesTraffic Flow IP Addresses and Dhcp SolutionSolutions Time and NTPLoading Software Page Operating the switch User Accounts and PrivilegesLogin Normal Mode and Security Mode Specific Parameters Remote Management Storing Files in Flash MemoryUsing Scripts Example output from the Show File commandSaving the Switch’s Configuration Storing Multiple ScriptsLoading and Uploading Files File Naming ConventionsLoading Files SPASetting Loader Defaults Example Load a Patch File Using HttpMore information Uploading Files From the SwitchExample Upload a Configuration File Using Tftp To upload a log fileUpgrading Switch Software Example Upgrade to a New Software Release Using To upgrade to a new software releaseFlash Example Upgrade to a new patch file To upgrade to a new patch fileUsing the Built-in Editor Editor screen layoutSnmp and MIBs Snmp MIBs in the AT-8700XL Series Software ReferenceFor More About Operations and Facilities Switch Ports Enabling and Disabling Switch PortsPacket Storm Protection Autonegotiation of Port Speed and Duplex ModePort Trunking Port MirroringVirtual Local Area Networks VLANs Creating VLANs Vlan Interaction with STPs and Trunk Groups Summary of Vlan tagging rulesProtected VLANs Spanning Tree Protocol STP Quality of ServiceGeneric Vlan Registration Protocol Gvrp IP Switching Spanning Tree and Rapid Spanning Tree Port StatesRouting Information Protocol RIP Igmp SnoopingDescription TriggersEvent ParametersPage Maintenance and Troubleshooting How the Switch Starts Up Switch startup messagesHow to Avoid Problems Backup software files Backup configuration scriptWatch for software updates What to Do if You Clear Flash Memory Completely If you accidentally do this, you will need toWhat to Do if Passwords are Lost Getting the Most Out of Technical SupportResetting Switch Defaults Checking Connections Using PingTroubleshooting IP Configurations Telnet FailsYour switch is acting as a Dhcp client Troubleshooting Dhcp IP AddressesUsing Trace Route for IP Traffic Your switch is acting as a Dhcp server

at-8700xl series switch specifications

Allied Telesis AT-8700XL Series Switches are sophisticated networking devices designed to meet the demanding requirements of modern enterprise environments. These managed Ethernet switches are optimized for reliability, performance, and scalability, making them ideal for various applications, from small businesses to large-scale networks.

One of the standout features of the AT-8700XL series is its robust Layer 2 and Layer 3 capabilities. This versatility allows the switches to perform both basic switching and advanced routing functions, facilitating efficient data traffic management. The series supports a wide range of standard protocols, including VLANs, STP, and RSTP, ensuring smooth and flexible network segmentation.

Another critical characteristic is the series' high-speed connectivity options. With multiple Gigabit Ethernet ports, the AT-8700XL series can handle significant data loads, ensuring seamless communication between connected devices. Furthermore, some models within the series offer 10 Gigabit uplink ports, providing the necessary bandwidth to connect to core networks or high-speed servers.

The AT-8700XL series incorporates advanced Quality of Service (QoS) features that enable network administrators to prioritize traffic effectively. This is particularly crucial for applications sensitive to latency, such as VoIP and video conferencing. By ensuring that time-sensitive data packets are transmitted promptly, the switches help maintain optimal performance across the entire network.

Power over Ethernet (PoE) support is yet another advantage of the AT-8700XL series. This feature allows the switches to deliver power to connected devices, such as IP cameras and wireless access points, via the Ethernet cable. This capability simplifies installations by reducing the need for additional power sources, ultimately saving on costs and improving efficiency.

Security is paramount in any network, and the AT-8700XL series does not disappoint. The switches employ robust security protocols, including Access Control Lists (ACLs), MAC address filtering, and DHCP snooping, to protect against unauthorized access and ensure network integrity.

In summary, Allied Telesis AT-8700XL Series Switches offer a comprehensive solution for various networking needs. With their Layer 2 and Layer 3 capabilities, high-speed connectivity, QoS features, PoE support, and security measures, these switches are well-equipped to enhance network efficiency and reliability, making them an excellent choice for organizations looking to future-proof their infrastructure. The AT-8700XL series exemplifies Allied Telesis's commitment to delivering high-quality networking solutions that cater to the evolving demands of businesses today.
Top Page Image Contents