APC SU043 1400 VA, SU041 1400 VA user manual Service, APC Contact Information, Limited Warranty

Page 16

Service

If the UPS requires service do not return it to the dealer! Follow these steps:

1.Use the Troubleshooting sections of this manual and the UPS User’s Manual to eliminate common problems.

2.Verify that no circuit breakers are tripped. A tripped circuit breaker is the most common problem!

3.If the problem persists, call customer service or visit the APC Internet Website (www.apcc.com).

4.Note the model numbers and serial numbers of the UPSs and the Redundant Switch and the date(s) purchased. A technician will ask you to describe the problem and try to solve it over the phone, if possible. If this is not possible the technician will issue a Return Merchandise Authorization Number (RMA#).

5.If the Redundant Switch is under warranty, repairs are free. If not, there is a repair charge.

6.Pack the Redundant Switch in its original packaging. If the original packing is not available, ask customer service about obtaining a new set.

7.Pack the Redundant Switch properly to avoid damage in transit. Never use Styrofoam beads for packaging. Damage sustained in transit is not covered under warranty.

8.Include a letter with your name, RMA#, address, copy of the sales receipt, description of the trouble, your daytime phone number, and a check (if necessary).

9.Mark the RMA# on the outside of the package.

10.Return the Redundant Switch by insured, prepaid carrier to the address given to you by Customer Service.

APC Contact Information

USA/Canada. … … … … … .

1.800.800.4272

Mexico… … … … … … … …

292.0253 / 292.0255

Brazil … … … … … … … … .

0800.12.72.1

Worldwide … … … … … …

1.401.789.5735

 

 

Internet and

http://www.apcc.com

Tech Support

 

Limited Warranty

American Power Conversion (APC) warrants its products to be free from defects in materials and workmanship for a period of two years from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products. To obtain service under warranty you must obtain a Returned Material Authorization (RMA) number from customer support (see the Service section of the User’s Manual). Products must be returned with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence, or misapplication or has been altered or modified in any way. This warranty applies only to the original purchaser who must have properly registered the product within 10 days of purchase.

EXCEPT AS PROVIDED HEREIN, AMERICAN POWER CONVERSION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL APC BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, APC is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

990-0253A, Revision 2 6/99

10

Image 16
Contents Redundant Switch User’s Manual Page English Page Table of Contents Page Electrical Safety SafetyHandling Safety Installation Initial StartupMount the Ears Install the Rails Mount the Redundant Switch in the Rack Connect EquipmentPowerChute plus Configuration Procedure Supported ConfigurationsStorage Operating Instructions Troubleshooting Redundant Switch Troubleshooting the High Availability SystemCommunications Problems Loss of Redundancy ProblemsSpecifications Limited Warranty ServiceAPC Contact Information Installation Tips for Rack Mount Units Rail Hardware

SU042-1 3000 VA, SU42-2 3000 VA, SU041 1400 VA, SU043 1400 VA specifications

The APC SU042-1, SU043, SU041, and SU42-2 are reliable uninterruptible power supply (UPS) systems designed to provide consistent power protection for essential electronic equipment. This range of UPS models is ideal for homes, small offices, and critical servers, ensuring peace of mind through a reliable power backup solution.

The APC SU042-1 is a high-capacity 3000 VA model that combines robust performance with smart technologies. It is equipped with a pure sine wave output, ensuring that sensitive electronics, such as servers and networking equipment, receive clean and stable power. With a compact design, this UPS easily fits into various environments while providing extended runtime options through additional battery packs. The LCD display offers real-time information on battery status, load, and input/output voltage, allowing for quick monitoring and management.

In the mid-range category, the APC SU043 and SU041 models stand out with their 1400 VA capacity. These units are perfect for desktop setups and small servers, offering essential features to protect equipment from power disturbances. Both models feature automatic voltage regulation (AVR), which stabilizes incoming voltage and minimizes the risk of damage from power surges. They also come with multiple output sockets, accommodating a variety of devices while ensuring maximum efficiency.

The SU42-2, another 3000 VA model, provides a higher capacity for businesses looking to safeguard critical infrastructure. Similar to the SU042-1, this unit boasts pure sine wave output and advanced LCD displays for monitoring. Additionally, the SU42-2 features customizable settings that allow users to tailor performance based on specific power needs, such as setting alarms and adjusting sensitivity to voltage fluctuations.

All four models utilize advanced battery management systems to enhance battery life and performance. User-friendly, they come with USB and serial connectivity options, allowing seamless integration with network monitoring software, enabling administrators to manage and monitor power status remotely. In conclusion, the APC SU042-1, SU043, SU041, and SU42-2 UPS models represent a versatile range of solutions designed to protect vital equipment against power disturbances, making them an essential investment for anyone reliant on a steady power supply.