Preliminary Information, Features, Related documents

Preliminary Information

Features

The American Power Conversion (APC®) Network Management Card 2 is IPv6 Ready and localized into nine languages. It has the following standard features:

•Detect 10/100 Mbps connection speeds

•Provide a data log accessible by File Transfer Protocol (FTP), Secure CoPy (SCP), or a Web browser

•Provide UPS scheduling features

•Provide an event log that is accessible by Telnet, Secure SHell (SSH), FTP, SCP, or a Web browser

•Generate system log (Syslog) messages

•Enable you to configure a BOOTstrap Protocol (BOOTP) or Dynamic Host Configuration Protocol (DHCP) server to provide the TCP/IP values a Network Management Card needs for network communication

•Generate e-mail notifications for UPS or system events

•Limit SNMP traps, e-mail notification, and event logging based on severity and categories of events

•Enable you to configure multiple Network Management Cards simultaneously over the network

•Provide UPS-specific application modules based on the Network Management Card’s hardware platform

•Provide enhanced security by supporting SSH, Secure Sockets Layer (SSL) and Secure CoPy (SCP)

•The AP9631 Network Management Card includes the preceding features and these additional features:

–Provides two USB ports

–Supports two universal input/output ports which can support temperature sensors (AP9335T), temperature/humidity sensors (AP9335TH), or Dry Contact I/O Accessory (AP9810). The AP9810 part requires a UPS application version of 5.0.3 or higher.

Note: Input/output connectors are not supported in firmware version 5.0.0. See the Software/Firmware page of the APC Web site, www.apc.com/tools/download, to download a firmware upgrade that supports this feature.