ATEN Technology CS-72M user manual Connecting Up

Page 9

Connecting Up

To connect up the unit, refer to the diagrams on pages 8 and 9 as you do the following:

1.Plug your keyboard and mouse into their respective connectors on the CS-72M’s front panel.

2.Plug your monitor, microphone, and speakers into their respective connectors on the CS-72M’s rear panel.

3.Use the custom KVM cables (described in the Cables section on p. 3), to connect the CS-72M CPU Ports to the monitor, keyboard and mouse ports of the computers you are installing.

4.For stability, use one of the Cable Keepers (provided with your purchase) to wrap around the KVM cable and stick it to the desktop.

5.If you choose to use external power, plug the power adapter into an AC power source, then plug the power adapter cable into the unit’s Power Jack.

Note: The power adapter should be DC9V with the inside positive and the outside negative:

6.Turn on the power to the computers.

Note: The CS-72M’s default is to link to the first computer you turn on.

- 7 -

2003-08-01

Page 8 Page 10
Image 9
Page 8 Page 10
Contents CS-72M 2003-08-01 Overview Features Console System RequirementsComputers CablesFront View ComponentsRear View CPU Port ConnectorsPreparation InstallationConnecting Up 2003-08-01 Operation Manual Port SelectionHotkey Port Selection Num Lock + Auto Scan Mode Selected LED Display SpecificationsSymptom Cause Action TroubleshootingTroubleshooting Notes Limited Warranty
Top Page Image Contents