Installation
1.Make sure that power to all the devices you will be
connecting up have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the switch will receive power from the computer.
2.To prevent damage to your installation due to ground potential difference, make sure that all devices on the installation are properly grounded.
Preparation
The
To keep the unit from sliding around or scratching the desktop, attach the silicone mounting pads that have been included with this package to the bottom panel of the switch, or the bottom of the mounting stand. The circular depressions show you where the pads should go.
- 6 -