4. INSTALLATION
4-7. Installing the machine head
2055Q
(5)
(4)
(2)
(1)
(3)
(6)
(1)
2056Q
NOTE:
The bed base (1) is made from plastic, so be careful not to hit it with the machine head when placing the machine head on top of it.
1.Open the hinges (2) as shown in the illustration. Then place the machine head gently on top of the bed base (1), while being careful not to clamp the cords (3).
2.Install the machine head with the spring washers
(4) and bolts (5).
NOTE:
Make sure that the felt support (6) do not touch the bed base (1).
4-8. Installing the head rest
(1)
1240Q
Tap the head rest (1) into the table hole.
NOTE:
Tap the head rest securely into the table hole.
If the head rest is not pushed in as far as it will go, the machine head will not be sufficiently stable when it is tilted back.
12 |
|
