HE-8000
4. INSTALLATION
7
4. INSTALLATION

4-1. Power table

Use the power table which has been specially designed for each sewing machines.
Positioning Model code
Vertical 127-H80-200-01
Table/legs assembly
Horizontal 127-H80-201-01
If using a commercially-available table, process it as shown in the following illustration.
NOTE:
The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight and
vibration of the sewing machine.
Machine installation should only be carried
out by a qualified technician.
Contact your Brother dealer or a qualified
electrician for any electrical work that may
need to be done.
The sewing machine head weighs more
than 56 kg. The installation should be car-
ried out by two or more people.
Do not connect the power cord until in-
stallation is complete, otherwise the ma-
chine may operate if the treadle is de-
pressed by mistake, which could result in
injury.
Use both hands to hold the machine head
when tilting it back or returning it to its
original position. If only one hand is used,
the weight of the machine head may cause
your hand to slip, and your hand may get
caught.
All cords should be secured at least 25 mm
away from any moving parts. Further-
more, do not excessively bend the cords o
r
secure them too firmly with staples, other-
wise there is the danger that fire or electric
shocks could occur.
Be sure to connect the ground. If the
ground connection is not secure, you run a
high risk of receiving a serious electric
shock, and problems with correct opera-
tion may also occur.
Install the belt covers to the machine head
and motor.
C
A
U
TI
O
N