Motorola HE-8000 I, LH4-B800E instruction manual 13 17 2118Q

(7)

(8)

(13) (17) 2118Q

(7)

(8)

2114Q

(15)

(16)

(17)2119Q

(7)	(15)
(8)
	(16)
(17)	2120Q

(13) 2121Q

5. OPERATION

Example 2: This example shows how to set a taper tack for the front tack pattern and an eyelet for the rear tack pattern.

1.Press the SELECT key (13) to change the mode to automatic, test feed or manual mode. Use the program No. keys (7) and (8) to select the program number for the program to use (example: program No. 10), and then press the ENTER key (17).

2.Press the SELECT key (13) to change the mode to program mode.

3.Use the program No. keys (7) and (8) to select the number for the parameter to be changed. (Example: Button hole/bar tack setting - Parameter No. 01).

4.Use the parameter keys (15) and (16) to change the setting for the selected parameter (Example: Buttonhole (free) setting value - 0), and then press the ENTER key (17).

5.Use the program No. keys (7) and (8) to select the next parameter number. (Example: Front tack pattern - Parameter No. 20).

6.Use the parameter keys (15) and (16) to change the setting for the selected parameter (example: Taper tack pattern setting value - 4), and then press the ENTER key (17).

7.Repeat steps 5 and 6 to set parameter No. 30. (Example: Rear tack pattern - Parameter No. 30) (Example: Eyelet pattern setting value - 3)

8.Press the SELECT key (13) to change the mode to automatic mode.

*An eyelet taper-tack buttonhole has now been set for program No. 10.

*The setting details can be saved in the program notes of the program memos for easy checking.

HE-8000 45