HE-8000
5. OPERATION
50
5-4-7. Cycle program
This example shows how to set C1 to program No. 3 and C2 to program No. 10.
A single cycle program can contain up to nineteen sewing patterns (C1 to C19).
1. Press the SELECT key (13) to change the mode to program mode.
2. While pressing the ENTER key (17), press the program no. UP key (7). Repeat this operation twice.
("C1" will appear in the program number LED (6).)
3. Use the parameter keys (15) and (16) to select
the number of the program to be set to C1
(example: program number 3).
(The program number will appear in the parameter
display LED (14).)
The CUTTER ON key (5) can be used to turn
cutter operation on and off. If "." appears in the
display, the cutter is turned on, and if "." does not
appear, the cuter is turned off. However, if the
cutter on indicator (4) is switched off during cycle
sewing, the cutter operation will always be off.
4. Press the ENTER key (17) to accept the program
number for C1.
(The display will stop flashing.)
5. Press the program no. UP key (7).
("C2" will appear in the program number LED (6).
The numbers "3" [the program number for C1]
and "0" will appear in the parameter display LED
(14).)
6. Use the parameter keys (15) and (16) to select
the number of the program to be set to C2
(example: program number 10).
7. Press the ENTER key (17) to accept the program
number for C2.
(The display will stop flashing.)
8. Repeat steps 5, 6 and 7 to enter program numbers
for C3 through to C19.
9. When the SELECT key (13) is pressed, the mode
will change to automatic mode and the program
number "C1" will appear.
Cutter on
Cutter off
(5)
(6)
(7)
(4)
(14)
(15)
(16)
(17)(13)
2129Q