ATEN Technology CS-72M user manual Components, Front View

Page 6

Components

Front View:

1 & 2

3

4

5

1.Port Selection Switches

M Press a switch to give the KVM focus to the system attached to its corresponding port.

M Pressing Buttons 1 and 2 simultaneously for 3 seconds starts Auto Scan Mode (see p. 11). While in Auto Scan Mode, pressing either button exits Auto Scan Mode and switches the KVM focus to its corresponding port.

2.Port LEDs

The Port LEDs are built into the Port Selection Switches. A lit LED indicates that its corresponding Port is the one that has the KVM focus. Depending on the Port’s status, the LED may flash according to a specific pattern (see the table on p. 12 for details).

3.Keyboard Port

4.Mouse Port

5.Stand

The stand allows the CS-72M to stand upright on the desktop.

-4 -

2003-08-01

Image 6
Contents CS-72M 2003-08-01 Overview Features Computers System RequirementsConsole CablesComponents Front ViewCPU Port Connectors Rear ViewInstallation PreparationConnecting Up 2003-08-01 Operation Manual Port SelectionHotkey Port Selection Num Lock + Auto Scan Mode Specifications Selected LED DisplayTroubleshooting Symptom Cause ActionLimited Warranty Troubleshooting Notes