
Optional: Configuring Remote Auto Install
Note the use of a
XSR(config)#interface serial 1/0.1
XSR#copy
RAI displays the following phased output on the remote node. Refer to the accompanying notes for additional explanation of phases.
********************* REMOTE AUTO INSTALL STARTING ***************
+RAI is starting up.
************* REMOTE AUTO INSTALL ATTEMPTING FOREVER **************
+Persistent (or
Phase 0 - Initialization and Starting search for proper
******** PRESS ANY KEY TO TERMINATE REMOTE AUTO INSTALL ***********
+A periodic reminder that you can terminate the program at any time by depressing any key on your keyboard. Be aware that any existing
Phase 1 - Trying
+Upon failing, the next
Phase 1 - Frame Relay interface Serial 1/0 reported DLCI 16 active
+Frame Relay has successfully found a FR network with active DLCIs.
Phase 2 - transmitting bootp - attempt #1
+The bootp client is sending out a request. At most, five requests will be tried.
Phase 3 - received IP address: 133.133.1.2
+The bootp client has received a response and the IP address for this interface is 133.133.1.2.
Phase 4 - Sending out Reverse DNS query onto Frame Relay
+rDNS is sending out a query looking for the hostname for IP address 133.133.1.2
Phase 6 - getting hostname
+rDNS has responded with the hostname xsrnode which will be used in the TFTP transfer. RAI will try several file names if this file is not available from the server.