Enterasys Networks XSR-3150 manual BRI Leased Frame Relay, BRI Switched Line

Configuring the WAN Ports

4.Enter encapsulation ppp to select PPP encoding.

5.Enter no shutdown to keep the BRI interface enabled.

BRI Leased Frame Relay

1.Enter interface bri 0:<1 2>.<1-30>to acquire BRI Interface mode and select the BRI port and channel 1 or 2.

2.Enter encapsulation frame-relayto select Frame Relay encoding.

3.Enter no shutdown to keep the BRI interface enabled.

4.Enter frame-relaylmi-type <ilmi ansi q933a auto none> to select the Local Management Interface type.

5.Enter interface bri 0:<1 2>.<1-30>multi-pointto acquire BRI Sub-interface mode and select the BRI port, channel, and sub-interface.

6.Enter ip address <xxx.xxx.xxx.xxx>/24 to set an IP address for the BRI interface.

7.Enter frame-relayinterface-dlci<16-1007>to acquire Frame Relay DLCI Interface mode and assign a data-link connection identifier to the Frame Relay sub-interface.

8.Enter no shutdown to keep the BRI sub-interface enabled.

BRI Switched Line

1.Enter interface bri 0 to acquire Interface mode and select the BRI port.

2.Enter isdn switch-type<basic-5ess basic-dms100 basic-net3 basic-ni1 basic-ntt>to select the Central Office switch type for the ISDN port.

3.Enter isdn spid1 <SPID><LDR> for the SPID (ISDN service) and LDR (local directory) telephone numbers.

4.Enter isdn spid2 <SPID><LDR> for a second SPID as needed.

5.Enter no shutdown to keep the BRI interface enabled.

6.Enter dialer pool-member<1-255> priority <0-255>to add a dialer pool and associated priority to this BRI interface. You can add additional dial pools as needed.

7.Enter exit to quit BRI Interface mode.

8.Enter interface dialer <0-255>to acquire Interface mode and select the Dialer port.

9.Enter ip address <xxx.xxx.xxx.xxx/24 to set an IP address for the Dialer port.

10.Enter encapsulation ppp to select PPP encoding.

11.Enter dialer string <phone number> class <Map Class name> to specify the destination number and associated Map Class.

12.Enter any additional dialer strings as instructed above.

13.Enter dialer pool <1-255>to create a dial pool from which the dialer interface will select a physical interface.

14.Enter show interface to verify your ISDN and dialer configuration.

15.Enter no shutdown to keep the Dialer interface enabled.

Remember to save your configuration after all edits.

3-10 Software Configuration