Enterasys Networks XSR-3150 manual Cable, CompactFlash and Accessory Specifications, Wan

Cable, CompactFlash and Accessory Specifications

Table A-1 XSR Hardware Specifications (continued)

Category		Parameters
Power	Typical values:	Motherboard: 75 watts (maximum)
Consumption		Serial NIM card: 4 watts
		T1/E1/ISDN-PRI NIM card: 3 watts
		ISDN BRI-S/T NIM card: 1 watt
Internal Power	Type	Dual universal (110/220 VAC) load-sharing, redundant units
Supplies (2)
	Input AC Voltage	100-125 Vac, 1.7A
	& Frequency	200-240 Vac, 0.85A
		50/60Hz
I/O Interfaces	Onboard (LAN)	2 10/100/1000BaseT Ethernet ports with RJ-45 copper connectors,
		10/100/1000 or Mini-GBIC optical connector
		RS-232 COM serial port with DB-9 connector
	NIM (WAN) Slots	Dual or Quad synch/asynch Serial ports with DB-type connector also
		supporting X.21, V.35, EIA-449, EIA-232/530 and combined V.35/
		EIA-232/530 DTE interfaces with required adapter.
		Single, dual, or quad T1/E1 RJ-48C port(s) with integral CSU/DSU.
		Full-channel, fractional or unchannelized.
		Single port T3/E3 un-channelized NIM with BNC connectors
I/O Interfaces	NIM (WAN) Slots	Dual or quad port BRI/PRI S/T NIM (RJ-45) or U NIM with RJ-45 or
		RJ-49C connectors, respectively.
		Dual or quad port BRI/PRI S/T NIM (RJ-45) or U NIM with RJ-45 or
		RJ-49C connectors, respectively.
		Single port Annex A/C or B ADSL NIM with RJ-11 connector.
		Includes CompactFlash card.
	NIM (LAN or	Single port 10/100Base-T Copper or 10/100Base-F Fiber-optic
	WAN)	Ethernet NIM with RJ-45 connector or MT-RJ multi-mode interface,
		respectively.
Chassis LEDs	14	Display port and system status, warn of Flash upgrade

Cable, CompactFlash and Accessory Specifications

Refer to the following table for specifications of cables, CompactFlash and accessories for the XSR. This equipment can all be obtained separately from Enterasys Networks or through any computer supply retailer.

Table A-2 XSR Cabling/Accessory Guide

Part Description	Connector	Part #	Function
6’ DB-9 null modem cable	DB-9, male	N/A from Enterasys	COM link to serial line
.58, 1, 2, 3, 5, or 10 meter 10/100BaseT	RJ-45	N/A from Enterasys	Ethernet link to hub/switch or
straight-through or cross-over cable			PC/uplink port

A-2