Components
Front View:
1 & 2
1.Port Selection Switches
Press a switch to give the KVM focus to the system attached to its corresponding port.
M Pressing Buttons 1 and 2 simultaneously for 3 seconds performs a Keyboard and Mouse Reset.
M Pressing Buttons 3 and 4 simultaneously for 3 seconds starts Auto Scan Mode (see p. 10).
2.Port LEDs
The Port LEDs are built into the Port Selection Switches. A lit LED indicates that its corresponding Port is the one that has the KVM focus.
Depending on the Port’s status, the LED may flash according to a specific pattern (see the table on p. 12 for details).
- 4 -